论文部分内容阅读
1.挂档困难若因拨叉轴上固定拨叉的紧固螺丝钉松动,应将螺丝钉拧紧并用铁丝挂牢;若因变速拨叉严重变形或磨损,应拆开检查修复或更换新件;若因操作不当,使齿轮倒角一侧崩齿或变形,应修复或更换齿轮;若因锁定弹簧压紧力过大,使变速杆或拨叉扭曲变形,应修复有关零件或更换变速杆和
1. If it is difficult to hang the gear, if the fastening screw for fixing the fork is loose due to the fork shaft, the screw should be tightened and fastened with wire. If the fork is severely deformed or worn due to the speed change, it should be disassembled and checked or repaired or replaced with new one. Due to improper operation, the gear chamfering side of the collapse or deformation, gear should be repaired or replaced; if the locking spring compression force is too large, so that the shift lever or fork distortion, should repair the parts or replace the gear lever and