【摘 要】
：
The foamed polypropylene (PP) with excellent mechanical and thermal insulating properties was reinforced by blending chlorinated polyethylene (CPE), followed by compression molding foaming in cross-link. The effects of CPE on the foaming behavior, thermal
【机 构】
：
Anhui Province Key Laboratory of Environment-friendly Polymer Materials, School of Chemistry and Che
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
The foamed polypropylene (PP) with excellent mechanical and thermal insulating properties was reinforced by blending chlorinated polyethylene (CPE), followed by compression molding foaming in cross-link. The effects of CPE on the foaming behavior, thermal and mechanical properties of the foamed PP were studied by the measurements of density, thermal conductivity, Vicat softening temperature, tensile strength, impact strength and SEM. The results showed that the foamed PP got the best properties when the weight ratio of CPE/ PP was 20wt％. The density of the obtained foamed PP was as low as 0.37 g/cm3, the impact strength was 16.5 kJ/m2, the tensile strength was 17.7 MPa, the thermal conductivity was 0.035 W/(m·K), and the Vicat softening temperature was 112 ℃.
其他文献
Four cellulose ethers (CEs) were compared for their effects on the pore structure of cement paste using mercury intrusion porosimetry. The experimental results show that the total pore volume and porosity of cement pastes containing the four cellulose eth
The Ni nanoparticles coated with Pb(Zr,Ti)O3 (PZT) were synthesized by a sol-gel method and in situ reaction. And their structure, oxidation resistance, and electromagnetic properties were investigated. The X-ray diffraction patterns (XRD) exhibited that
Using L-glutathione (GSH) as a capping agent,ZnSe/GSH quantum dots (QDs) were prepared under microwave irradiation and irradiated under dark,ultraviolet light and incandescent light,respectively.The properties and interaction of different lights irradiate
Induction melting was used as a routine method to synthesize Mg23Ni10, Mg22LaNi10 and Mg21La2Ni10 alloys, and followed by a detailed microstructural characterization which included X-ray diffraction (XRD), scanning electron microscopy (SEM) with energy di
A novel gap-plasmon of Fe3O4@Ag core-shell nanoparticles for surface enhanced fluorescence detection of Rhodamine B (RB) was developed.Fe3O4@Ag core-shell nanostructures with Ag shell and Fe3O4 core were synthetized by self-assembled method with the assis
Learning from the process of biominerals formation provides tremendous ideas for developing advanced synthesis techniques.According to the structure formation of tooth enamel,a recombinant amelogenin his-AmelⅩ was designed and constructed.The protein was
Wear-resistant cladding plates consisting of a substrate (Q345 R) and a clad layer (BTW1) were bonded through hot rolling at the temperature of 1 200 ℃ and a rolling speed of 0.5 m/s. The microhardness of the cladding plate was also tested after being hea
The lap joints of Fe-based metallic glass ribbons were carried by resistance spot welding, and the microstructures of spot welds were investigated by X-ray diffraction and transmission electron microscopy. The results indicated that the perfect formations
The influences of nano silica (NS) on the hydration and microstructure development of steam cured cement high volume fly ash (40 wt％, CHVFA) system were investigated. The compressive strength of mortars was tested with different NS dosage from 0 to 4％. Re
Molecular structures of polycarboxylate (PCE) superplasticizer significantly affect the rheological properties of cement paste. Consequently, we employed self-synthesized PCE copolymers with different carboxylic densities to investigate their influence on