呼吸机本机作为生命支持以及呼吸治疗的重要设备,它是一种非常严密的治疗方式,其正常使用的性能与病人的生命有着直接的联系,该项治疗方式也叫机械通气。其实,在现代化呼吸机本机发展的过程中,应用的医院科室有很多,例如:急诊科、呼吸科等方面,并且逐渐的由机械控制发展到计算机智能化控制。那么,呼吸机本机在计量检定以及校准的工程中,经常存在着一些非常态下的报警现象,从而相关数据的校准造成一定程度上的误差。因此,本文就是针对这一现象,提出了一些排除故障,以此保证呼吸机本机的正常运行。 Ventilator This machine is a vital device for life support and respiratory therapy. It is a very tight treatment and its normal use is directly related to the life of the patient. This treatment is also called mechanical ventilation. In fact, in the process of the development of the modern ventilator itself, there are many hospital departments that are used, for example, emergency department and respiratory department, and gradually developed from mechanical control to intelligent computer control. So, the ventilator in the metrology calibration and calibration of the project, there are often some abnormal alarm, so that the calibration of the relevant data to a certain extent, the error. Therefore, this article is aimed at this phenomenon, put forward some troubleshooting, in order to ensure the normal operation of the ventilator machine.