【摘 要】
：
The basic characteristics of the soft rock roadway under the dynamic pressure are analyzed. At the same time, the three fundamental approaches for controlling the surrounding rock are proposed, which are improving the surrounding rock strength, lowering t
【机 构】
：
School of Energy Science and Engineering, China University of Mining & Technology, Xuzhou 221008, Ch
论文部分内容阅读
The basic characteristics of the soft rock roadway under the dynamic pressure are analyzed. At the same time, the three fundamental approaches for controlling the surrounding rock are proposed, which are improving the surrounding rock strength, lowering the rock mass stress and selecting the reasonable supporting technology. The research results are elucidated, including the distribution of the surrounding rock plastic zone, the movement and damage of the surrounding rock under the dynamic pressure, controlling the floor heave through reinforcing the roadway walls and corners, the new route to develop the roadway metal supporting technique, the key theory and technique for the bolt supporting in the coal roadway, the performance and prospect of the ZKD high-water-content quick-setting material, and so on. Finally, some personally views are put forward about the roadway metal supporting, bolt supporting, new material and the stress-relief under the high stress condition.
其他文献
A two-dimensional numerical model of a large (1000 m×200 m) section of mine strata in the vicinity of seam 349 in Iongwall panel 802 in part B of the Murcki Colliery in the Upper Silesian Coal Basin, Poland, was built using the Universal Distinct Element
Based on the number of fatalities per year,a persistent area of concern in mine safety continues to be equipment related.Data from the period 1995 through 2007 were studied in order to identify major hazards for underground mining equipment-related fatal
To make a better understanding of the mechanical characteristics of the sur-rounding rocks in the tailentry and headentry with different coal seam thickness at fully mechanized top-coal caving face (FMTC face), the stress transition and displacement aroun
It was illustrated that the mining conditions inducing disasters changed with depthboth in regularity of gradual and sudden change. The sudden change depth for differentdisaster conditions are different and controlled by different factors. The high temper
Procedures of preparation of numerical analysis, consisting in a simulation of cooperation of three different media: steel, liquid and gas undergoes dynamic load were discussed. Modelling of the initial static load of the mechanical system was presented.
The effect of geological uncertainty on the development and mining of underground coal deposits is a key issue for longwall mining, as the presence of faults generates substantial monetary losses. This paper develops a method for the conditional simulatio
Roadway surrounding rock is a compound structure consisted of roof, floor and sides. The sides of extraction opening is the weak coal mass, which affect immediately the stability of floor. It was simulated by numerical calculation for the strength of side
The trapezoidal cross-section roadway, driven along with its medium and fine grain sandstone roof in special thick stratum, was situated in shale strata. Rock-lining wall was employed in roadway, which its roof is in the free situation. Under the action o