High-temperature corrosion of Sn-Bi-Zn-Ga alloys as heat transfer fluid

来源 :稀有金属(英文版) | 被引量 : 0次 | 上传用户:blueblacktzb
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The new heat transfer alloy is highly reactive at high temperatures,and the corrosion of the container mate-rial determines the service life of the heat transfer system.The high-temperature corrosion of Sn-Bi-Zn-Ga alloys as heat transfer fluid was investigated.The microstructure and elemental distribution were studied by field emission scan-ning electron microscopy (FESEM) and energy dispersive spectroscopy (EDS).The thermal properties before and after corrosion were studied by differential scanning calo.rimetry(DSC).The results show that the corrosion kinetics of the studied materials follows the parabolic law and the thermal properties after corrosion are improved.Ga significantly improves the thermal conductivity.316 stainless steel exhi-bits excellent corrosion resistance due to its high Cr and Ni contents.Corrosion mechanism analysis shows that the oxidation of Ga has a smaller Gibbs free energy,and an oxide forms at the corrosion interface to prevent dissolution cor-rosion and oxidative corrosion of the container material.
其他文献
Al2O3-ZrO2-TiO2 coatings were successfully prepared by plasma spraying Al2O3-ZrO2 composite powders with and without TiO2 addition.The effects of TiO2 on the ph
For the purpose of elevated temperature service and weight reduction in aerospace vehicle applications,a novel Ti-Zr-Fe-Cu-Ni-Co-Mo filler metal was employed to join TiAl to Ni-based superalloy(GH536).The effects of brazing temperature on interfacial micr
The magnesium alloy has a unique advantage in 3C fields due to its high specific strength and excellent electromagnetic shielding characteristic.However,it is d
Ta-W alloys have unique properties but their applications at high temperatures are restricted due to their poor oxidation resistances.The addition of Al and Ti
An investigation of lanthanum oxide (La2O3)addition to tungsten heavy alloy (WHA) with a ternary composition of W-7Ni-3Fe was reported in this study.The mixed p
针对现有光学传感器难以满足大型结构中高频振动监测的需求,提出一种基于椭圆铰链的中高频双光纤布拉格光栅加速度传感器。基于传感器理论模型分析传感器的灵敏度和谐振频率,采用MATLAB和ANSYS软件对传感器的结构参数进行优化及仿真,研制双光纤布拉格光栅传感器,并进行传感器灵敏度标定实验。结果表明:传感器的谐振频率约为780 Hz,灵敏度为132.53 pm/g,横向抗干扰度小于3.3%,可用于80~500 Hz之间振动信号的实时监测。
The W-La2O3-Y2O3-ZrO2materials were prepared by vacuum hot pressing sintering process.The microstructure was characterized by scanning electron microscopy(SEM).The effects of sintering temperature,sin
In order to attain high-quality Ti-Ni-Cu film,the surface morphologies,chemical compositions and mechanical properties of Ti-Ni-Cu thin films prepared by direct current(DC)magnetron sputtering at various processes were characterized by scanning electron m
Ti(C,N)nanoparticles were added to an Al-0.3 Ce alloy by ultrasonic treatment.Further annealing at 570℃for4 h afforded the ultimate tensile strength of 79 MPa and electrical conductivity of 64.0%IACS for the Al-0.3 Ce alloy with1.5 vol%Ti(C,N)addition.Bot
In this work,amorphous Zr55Al10Ni5Cu30 alloy thin film was prepared on D36 steel substrate by magnetron sputtering method.The film was characterized by scanning