在机床制造中所采用的多片摩擦电磁结合子需要特种的摩擦片,此摩擦片的形状如图1(主动片)和图2(被动片)所示。它是由合金弹簧钢制成的,其厚度接接台子的外形尺寸在0.8～1.0公厘范围内。 摩擦面A和Б有六个孔1,这些孔构成槽,此糟又好像把摩擦面分成两个圆环。每个摩擦片有3到6个 The multi-chip frictional electromagnetic conjugate used in machine tool manufacture requires a special friction plate, the shape of which is shown in Figure 1 (active plate) and Figure 2 (passive plate). It is made of alloy spring steel, the thickness of the table attached to the external dimensions of 0.8 to 1.0 mm range. Friction surfaces A and B have six holes 1, these holes constitute a groove, this bad and seems to divide the friction surface into two rings. There are 3 to 6 pads per pad