【摘 要】
：
Presented the methods to obtain the cogging force of permanent magnet linear synchronous motors(PMLSMs), analyzed the characteristics of the cogging force,and provided a basis for reducing the effect of the cogging force. 2-dimensional finite element meth
【机 构】
：
School of Electrical Engineering, Xi’an Jiaotong University, Xi’an 710049, China;Department of Elect
论文部分内容阅读
Presented the methods to obtain the cogging force of permanent magnet linear synchronous motors(PMLSMs), analyzed the characteristics of the cogging force,and provided a basis for reducing the effect of the cogging force. 2-dimensional finite element method(2D FEM) was used to solve the whole motor when its mover was at different position, so that the relation was derived between the cogging force and the mover position. The analysis results show that the cogging force between the two ends of the primary iron-core and the secondary permanent magnets (PMs) is sinusoidal function of the mover position under certain conditions only. Two proposed methods,namely direct and indirect methods, are applied to calculate the cogging force between the primary iron-core teeth and the secondary PMs. The agreement of the two methods is validated.
其他文献
Through research on the application of hydroviscous speed-adjusting clutch in belt conveyor, this paper concluded that hydroviscous speed-adjusting clutch has many advantages such as controllable start and stop, overload protection and multi-motor power e
The use of high As-bearing coals has caused more than 3,000 cases of arsenosis patients in southwest Guizhou Province, China. The mode of occurrence of arsenic in coal is an important key role in understanding its behavior during usage and damage pathway
Coals are carbon-rich materials with excellent aromatic nature and macromolecular structure. They pose great potential as the source of organic chemical feedstock and high value-added carbonaceous materials in the 21 st century. As some of the most import
Fulfill the screen test and float-and-sink analysis for high sulfur coal gangue from a Guizhou coal mine,analyzed the washability of its tail coal.Seen from the results:most of sulfur in sample is pyrite,the Sulfur content of different particle classifica
L3414 mechanized mining working face (No.14 coal seam) of Lingxin Mine is under the Xitian River. The mining disturbed zone where rock properties and conditions have been changed due to mining, the safety and environmental protection were concemed greatly
A new method was proposed for tracking the desired output of chaotic dynamical system using the feedback linearization and nonlinear extended statement observer method. The feedback linearization was used to convert the nonlinear chaotic system into linea
The subsidence prediction theory under the condition of grouting into bedseparated was developed. Reducing ground subsidence by grouting was carried out on eight fully-mechanized top-coal caving faces, by using the continuous grouting in multiple-layer to
At present, coal mine fires were for ecasted with some temperature, smog, CO,CO2, etc, however, this method can\'t meet the requirements for safe production of coal mines in monitoring accuracy and validity. Overcoming these problems of foregone monitor
Based on the investigation of NOx formation mechanism, a coal-fired utility boiler whose capacity is 1 004 t/h was studied. Excessive air coefficient, inclination of burner and the way of coal supply were investigated through experimental method. Results
Porous ceramics was made from coal fly ash,and the microstructure and other properties were characterized as a function of the amount of the pore-forming agent and firing temperature.The results indicated that the proper sintering temperature for the usef