The influence of annealing temperature on the electrochemical properties and structure of the rapidly quenched LPC(NiAlM......

采用织构定量检测、 EBSD微取向分析、晶粒尺寸分析等手段研究了退火加热过程对高压电解电容器阳极铝箔立方织构的影响. 结果表明:......

目的研究轧制压下量为67%的纯钨板在退火过程中的再结晶行为。方法对67%变形量纯钨板在1250℃下进行等温退火实验,运用电子背散射......

利用Gleeble-3500在变形温度为600-900℃,应变率为0.001-1 s-（-1）下,对TiNiCr合金进行压缩,对真应力-应变曲线和压缩后试样的显微组......

Through the experiment, the reduced temperature, the containing scandium quantity of the fused salt, the agitated intens......

采用光学显微镜、维氏硬度计和透射电子显微镜研究Al-Zn-Mg-Cu合金大变形热轧板退火过程中的组织演变和力学性能变化,探讨再结晶形......

AA1060 aluminum foil was rolled from 4 mm to 20 μm by asymmetric rolling without intermediate annealing. The microstruc......

<正>The microstructural evolution of cold-rolled aluminum alloy 3003 during annealing was investigated by means of micro......

分别以乙醇、乙醇/水、水为提取剂,研究从白桦树皮中提取桦木醇的工艺,确定了用乙醇作提取剂的最佳提取工艺条件：固液比（g∶mL）为0.08......

利用ＳＥＭ中的和射电子衍射技术研究了Ａｌ－１．３Ｍｎ（质量分数，％）合金中没形变取向基体中粒子周围亚晶以及再结晶初期相应的粒子促进形核晶粒的取向分布，并......