【摘 要】
：
This study seeks to develop a scientific understanding of the effects of dynamic loading history on the low-yield-strength shear panel damper (LYSPD) mechanical properties and fatigue performance.The
【出 处】
：
2012 Postdoctoral Symposium of China on Materials Science &
论文部分内容阅读
This study seeks to develop a scientific understanding of the effects of dynamic loading history on the low-yield-strength shear panel damper (LYSPD) mechanical properties and fatigue performance.The LYSPD model is supposed as perfect elastic-plastic without strength deterioration.By adjusting the damper strength with the above supposition in the DYMO software, the serial earthquake response waves of the LYSPD under different soil conditions are obtained firstly.Subsequently, several waves, the most prone to damage at each soil condition, are selected as dynamic loading waves to verify the LYSPD dynamic performances experimentally.The test results suggest that the dynamic loading histories have no influence on the LYSPD strength or the supposed model while they affect the fatigue performance.The applicability and accuracy of three fatigue evaluation methods, cumulative plastic shear strain, cumulative energy absorption and Miner rule, are also compared according to the test results.
其他文献
Microstructures of as-cast and extruded ZK60-xRE (RE=Dy, Ho and Gd, x=0~5) alloys were investigated by optical microscope, scanning electron microscope, transmission electron microscope, X-ray diffrac
A novel hybrid Cu matrix composites reinforced by graphite particle (Gr) with volume fraction of 5-15% and nano-SiC particle (nano-SiCp) of 3% has been prepared by powder metallurgy.The results show t
TiB whiskers reinforced pure Ti (TiBw/Ti) composites with a novel network microstructure were successfully fabricated by reaction hot pressing (RHP).TiBw are in situ synthesized around the large pure
The new generation hydro-cracking reactors are usually made of 2.25Cr-lMo-0.25V steel.After austenization at 940℃ of the hot-rolled sample, the study show that the microstructures of the steel after w
SiCp/2024Al composite foams were manufactured by powder metallurgical methods using foaming agent CaCO3.The fabrication technology of composite foams was researched, and their compressive properties a
To improve the fatigue performance of metal materials which are applied in the aeroplane structure is a significant objective of new material research.In recent decades, it becomes a common view that
This work aims to study the effect of sintering temperatures on the compressive strength and weight of net paste concrete.The compressive strength and quality variety of concrete which undergo differe
The quench sensitivity of a 6351 alloy was determined by time-temperature-transformation (TTT) curves and time-temperature-property (TTP) curves by an interrupted quench technique with the measurement
In traditional semi-rigid analysis of extended end plate connections is assumed to be deterministic parameters, most of moment-rotation models of the joint is determined by curve-fitting and statistic
Hygro-thermo-mechanical model is presented for investigating hygro-thermal defromation of concrete based on the coupling effect of multi-physical field and transfer mechanism of moisture and heat in p