Investigation on the influence of quality of Phosphorus gypsum on over-sulphur-phosphorous-gypsum-sl

来源 :The 14th International Congress on the Chemistry of Cement ( | 被引量 : 0次 | 上传用户:digitalmachinel
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  The paper studied the influence law of soluble-phosphorus、 eutectic-phosphorus and soluble-fluorine to the physical properties of over-sulphur-phosphorous-gypsum-slag cement paste (OPSC).That cement was modified by adding steel-slag-powder, and the paper also discussed the mechanism.The result showed that the content of soluble-phosphorus、 eutectic-phosphorus and soluble-fluorine affected the setting time and mortar strength remarkably.If phosphorous gypsum(PG) was pretreated by steel-slag powder, the setting time became shorter and the early age strength became higher.As a result, it is the effective way to prepare the high quality OPSC that descreasing the content of soluble-phosphorus、 eutectic-phosphorus and soluble-fluorine, and pretreated by steel-slag-powder.
其他文献
Slag is increasingly used for replacing a part of clinker.The addition of slag modifies the hydration process and so the physico-chemical properties (such as porosity, transport properties...) of ceme
The use of supplementary cementitious materials (SCMs) in blends with ordinary Portland cement (OPC) influences positively the workability, durability and strength of concrete, reduces the CO2 emissio
In this study, volumetric deformation of gap-graded blended cement pastes with large amount of supplementary cementitous materials (SCMs) was investigated and compared with those of Portland cement an
This paper presents a comprehensive approach to study calcareous fly ashes in composite cements.Fly ashes are difficult to characterize due to their complex microstructure and the presence of multiple
Numerous industrial by-products have potential for use as alternative supplementary cementitious materials (ASCMs) in concrete.The objective of the present study is to define the reactivity and the im
In this paper, ternary and binary blended cement pastes as well as pure Portland cement paste were prepared by Portland cement, ground granulated blast-furnace slag (GGBFS), limestone powder and water
C-S-H gel is the main product in the Portland cement (PC) hydration.Of their structure and composition depends the cement properties (strength, durability...).The mixes of others materials with PC pro
C-S-H, calcium silicate hydrate, is the main phase in hydrated plain cement paste.C-A-S-H, alumina-containing calcium silicate hydrates, is the main phase in blends of plain cement containing aluminat
Whether Sulfite calcium, the main component of dry flue gas desulphurization (FGD) byproduct, has the regulating setting effect just like sulfate calcium is one key factor to determine it can be widel
Nuclear Magnetic Resonance relaxometry (1H NMR) is an established technique for non-invasive and non-destructive characterization of pore size distributions and pore-water interaction in porous media.