【摘 要】
：
Reduced CO2 emission and increased energy saving as well as potential use of several industrial by-products as components of clinker-generating raw mix are well-recognized features associated with cal
【机 构】
：
School of Engineering, Università degli Studi della Basilicata, Viale dell'Ateneo Lucano 1085100 Po
【出 处】
：
The 14th International Congress on the Chemistry of Cement (
论文部分内容阅读
Reduced CO2 emission and increased energy saving as well as potential use of several industrial by-products as components of clinker-generating raw mix are well-recognized features associated with calcium sulfoaluminate (CSA) clinker manufacture which, compared with that of Portland clinker, requires less limestone in the kiln feed as well as lower burning temperature, fuel consumption and grinding energy in the cement mill.Furthermore, various chemical gypsums and Al2O3-rich by-products like alumina powder and anodization mud were successfully experienced as substitutes for natural gypsum and bauxite, respectively.
其他文献
Many studies have shown that the formation of geopolymers proceeds according to a mechanism of dissolution-restructuring-polymerization resulting in a solid material.Nevertheless, texturing of the mat
Cracks were observed when the magnesium silicate hydrate gel cement (prepared by 40% MgO/60% silica fume) was dried.This drying cracking is believed to be caused when unbound water evaporates from the
This paper reports on a comparative study of the mechanical performance at high temperatures of a commercial Portland cement (CEM I 42.5 (OPC)), a hybrid cement (CEM HYC =30% clinker + 32.5 % BFS + 32
Calcium aluminate cement (CAC) is a specialty cement with distinct advantages over ordinary portland cement (OPC).It has been successfully used in many fields for more than 100 years.However, one prim
Yeehmite is one ot the major constituents of Calcium SulphoAluminate type cements (CSA) and almost entirely responsible for the hydraulic reactivity at early age.It is well known that yeelimite can fo
The present study focus on the effect of curing temperature on the hydration of calcium aluminate cement (CAC) dominated ternary binders at 0, 10, 20 and 40℃.Two varieties of calcium sulfate are emplo
This work presents a comparative study of the hydration and carbonation reactions of three calcium silicate phases.Triclinic tricalcium silicate and γ-dicalcium silicate were synthesized in laboratory
Calcium sulfoaluminate (CSA) cements have been shown to have lower carbon footprint than that of Portland cement.In addition, the expansive nature of CSA-based cement can be utilized to enhance the re
Magnesium phosphate based cements are rapid setting have high early strength.To prolong the setting time,retarding additives are often used in magnesium phosphate cements.In the present paper, the mag
This paper presents a novel technique to immobilize the hazardous radioactive elements in nuclear waste water such as 134Cs, 137Cs and 90St with a new kind of geopolymer prepared from paper sludge ash