【摘 要】
：
Investigations carried out for last years in cement polish industry indicate usefulness of calcareous fly ash in technologies of production of clinker with low CO2 index.In this paper fly ash from lig
【机 构】
：
Institute of Ceramics and Building Materials/Division of Glass and Building Materials in Krakow, 31-
【出 处】
：
The 14th International Congress on the Chemistry of Cement (
论文部分内容阅读
Investigations carried out for last years in cement polish industry indicate usefulness of calcareous fly ash in technologies of production of clinker with low CO2 index.In this paper fly ash from lignite coal combustion process are analyze.There are fly ash with high CaO and Al2O3 concentration, with chemical composition similar to blast furnace slag, containing calcium oxide not combined in carbonate minerals.That chemical and mineral composition created very good pozzolanic-hydraulic properties of the calcareous fly ash, and usefulness to low CO2 emission composite cement production with high non clinker amount.In the paper, another way to reduce CO2 emission in cement production process has been discussed.Using the calcareous fly ash containing great amount noncarbonated CaO form allowing to reduce of CO2 index even to 70 kg per Mg of clinker.Additionally, using the calcareous fly ash as a aluminosilicate raw materials can improve burnability factors of clinkering process.The laboratory and industry trials ordinary Portland clinker production using calcareous fly ashes containing about 25% noncarbonated CaO form are presented.
其他文献
Calcium phosphoaluminate solid solution (LHss) was the main phase of phosphoaluminate cement (PALC),which exhibited good strength development.Based on this, a series of new cement minerals, Ba-bearing
The influence of Fe2O3 on the formation and decomposition kinetics of calcium sulphoaluminate formed from tricalcium aluminate and calcium sulfate was investigated in this paper.Rietveld quantitative
In India, Phosphogypsum is currently generated over 7 million tonnes as an industrial waste during phosphoric acid manufacturing in the wet process treatment of natural rock phosphate by sulfuric acid
Calcium silicate is the main mineral of Portland cement clinker, in which low heat consumption and exhaust emissions require low calcium content.Therefore, exploring the presence of low calcium minera
The useful properties of cement arise from the assemblage of solid phases present within the cement clinker.The phase proportions produced from a given feedstock are often predicted using well-establi
Oxide compounds are included in all types of cements which to be most important in practice.That is why a great attention is paid to studying the features determining the availability of binding prope
Structural characteristics of belite incorporating various amount of BaO and their reactivity with water was investigated by means of XRD, FT-IR and calorimetry.The results indicates that the incorpor
The internal standard and G-factor methods were applied to Rietveld X-ray diffraction quantitative analysis of Portland cement using XPert Highscore Plus and GSAS-EXPGUI software.The phase content of
It has been observed that certain cement clinkers exhibit a better response with chemical additives than other clinkers regardless of the resulting cements other performance criteria, such as early an
Currently, Indian cement industry is having option of increasing production of blended Portland cements using supplemeniary cementitious materials and utilizing raw materials principally derived from