中州分公司能源消耗现状分析及节能途径探讨

来源 :第十四届全国氧化铝学术会议 | 被引量 : 0次 | 上传用户:huan2735
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
本文对中州分公司2002年能源消耗情况进行了分析,阐述了通过开展设备经济运行和技术攻关活动使能源消耗大幅降低的经验,探讨下一步的节能途径,结合生产实际,提出熟料窑进行降低生料浆水分、稳定窑热工制度、提高煤磨出口温度、磨细生料煤是下一步的节煤方向,抓好常压脱盐、Ⅴ组Ⅵ组间接加热脱硅机和蒸发器的改造是下一步的节汽方向,抓好自发电量、提高功率因数和设备开停车的管理是下一步的节电方向,同时抓好生产稳定运行和提高煤质,可以进一步降低能耗.
其他文献
The isothermal section(500 oC)of the phase diagram of the Gd-Fe-Ga ternary system WaS investigated by X-ray powder diffraction analysis.Eleven binary compounds,GdGa2,GdGa,Gd3Ga2,Gd5Ga3,GdFe2,GdFe3,Gd2
Serials of DyCo2-xGax alloys with x from O to 2 were prepared by arc melting and investigated by X-ray powder diffraction analysis.Four ternary compounds,DyCo1.33Ga0.67,DyCoGa,DyCo0.67-0.35Ga1.33-1.65
The influence of C and Al content on phase transformation temperatures, i.e. the Al and A3 of Fe-rich alloys is investigated by dilatometric analysis. With the new set of experimental data, an updated
The TbFe6-xGa6+x compounds (x=0,0.5,1.0 and 1.45)have been prepared and studied by X-ray powder diffraction and magnetization measurements.The structure of the compound TbFe6-xGa6+x transfers from the
A thermodynamic database on the phase equilibria of the uranium base alloys,including U-X(X:Al,Co,Cr,Cu,Ga,Mg,Mn,Mo,Nb,Th,W)binary system has been developed by the Calculation of Phase Diagrams(CALPHA
Nanostructuring is one of the effective approaches to lower the thermal conductivity of thermoelectric materials for improving its figure of merit.The nano-sized uniform skutterudite Co4-xNixSb12(x=0,
The 450℃ isothermal section of the Zn-Fe-Nb ternary system with an emphasis on the Zn-rich corner was experimentally determined by means of optical microscopy,SEM-EDS analysis and X-ray diffraction.A
The composition range of amorphous forming for Al-Fe-Zr system has been determined by mechanical alloying of mixture of elemental powders.The phases of as-milled powders were analyzed by XRD.The compo
It has been recognized that a substantial increase in the magnetostrietion of Fe occurs with the substitution of small amounts of non-magnetic elements, such as Ga and AI, for Fe. The magnetostriction
本文首先对喷气包缠纺和喷气涡流纺的加捻过程进行了描述,加捻过程的描述是成纱机理研究的基础。然后对喷气涡流纺纱成纱机理的自由端特征进行了分析,并利用PHOENICS软件对喷嘴中气流的运动进行了模拟,以及利用高速摄影对纤维加捻过程进行了拍摄,同时,结合成纱结构进一步说明了成纱机理。认为喷气涡流纺具有明显的自由端纺纱特征,但中心仍有未断裂的一定量的连续纤维,因此,喷气涡流纺可以看成是部分自由端纺纱、半自