The Role of Wind Energy in a Greenhouse Gas-neutral Energy Supply

来源 :第八届中国(上海)国际风能展览会暨研讨会 | 被引量 : 0次 | 上传用户:jonsh123
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  In one of the latest publications of the German Federal Environment Agency (Umweltbundesamt,UBA),an almost completely greenhouse gas (GHG)-neutral society was modeled considering significant emission reductions in all GHG relevant sectors and per-capita emissions of just 1 ton of CO2eq.The study shows that future GHG-neutrality in Germany is technically achievable.This implies,however,that the entire electricity,heat and transport sectors as well as the major part of the industrial sector need to be fed completely from renewable energy sources.In a study which was published in 2010 the Federal Environment Agency already showed that an electricity supply based on 100% renewable energies in 2050 is possible in Germany.Assuming a sustainable use of biomass,its use was restricted to waste and residues (cascade use) in 2050,which limits its contribution as energy source to the entire system.The German potential for hydropower and geothermal energy use is also limited.That is why photovoltaic and especially wind power are important renewable energies that will play the key role in a GHG-neutral energy supply.A GIS-based study which was also published by the Federal Environment Agency in 2013 showed that in particular the potential of onshore wind energy has been underestimated so far in Germany.Even if the realizable potential is distinctly lower - because on the one hand certain considerations requiring case-by-case decisions could not be reflected in a sensible way,on the other hand economic framework conditions or local acceptance levels were not taken into account - it becomes clear that onshore wind energy generation confirms its key role in the renewable energies portfolio in Germany.
其他文献
氧化锌(ZnO)是一种新型的直接宽禁带(3.37ev)半导体材料.由于其优良的物理性能,在压电转换、太阳能电池、传感器以及集成电子器件等领域有着潜在的开发前景.很多研究结果表明,ZnO薄膜的光学和电学性质与薄膜质量有着直接的关联.而薄膜质量又与其衬底材料密不可分.目前,很多研究者通过在Si衬底和ZnO薄膜间添加缓冲层或换用其他衬底材料,以期提高ZnO薄膜的质量.
具有极大光学非线性和超快响应的薄膜材料是未来集成光学器件应用中极具希望的备选者.近年来,过渡金属硫系化合物(WS2,WSe2,MoS2,MoSe2等)由于一系列优异的电子学、光学性质、良好的机械性能和化学、热力学性质而得到了广泛关注.得益于二维量子限制效应和层与层之间微扰的消除,单层过渡金属硫系化合物更是由体材料的间接带隙转变为了直接带隙半导体.
目的:研究西班牙激光联合等离子技术治疗良性前列腺增生的有效性和安全性.材料和方法:自2014.10-2015.6间,采用西班牙激光联合等离子技术治疗良性前列腺增生患者15例,年龄61-83岁,平均73岁.15例患者中因反复尿潴留就诊11例,因残余尿增多(大于100ml)就诊4例,伴有膀胱结石1例,合并上尿路积水1例.所有患者都已接受过药物治疗.
会议
目的 放置安全导丝是输尿管软镜手术操作常规之一.然而随着输尿管镜技术的发展,部分中心开始摒弃常规留置安全导丝的操作方法.本研究拟评估不使用安全导丝的输尿管软镜钬激光碎石术治疗直径2cm以内肾脏结石的疗效及安全性.方法 回顾性分析2009年1月至2012年2月输尿管软镜钬激光碎石术治疗2cm以内肾结石患者资料.输尿管软镜操作流程如下:1.输尿管硬镜在工作导丝引导下进入输尿管,全程检查输尿管有无狭窄、
会议
目的: 探讨微通道经皮肾镜下大功率钬激光在肾结石治疗中的应用.方法:采用8/9.8 F Wolf输尿管硬镜,微通道经皮肾镜下使用瑞柯恩60W钬激光机碎石,碎石能量为4×15Hz.结果:本组256例,均穿刺成功,一次性完成碎石取石241例,二次15例,全部病例主要结石均被取出,单纯肾盂或肾盏结石取净率为93%,多发或鹿角状结石取净率为77.8%.
目的 探讨输尿管镜钬激光治疗输尿管狭窄的手术方法及治疗效果.材料和方法 回顾性分析2012-2014年采用输尿管镜钬激光治疗输尿管狭窄12例,其中8例为输尿管炎症息肉导致狭窄,4例为输尿管瘢痕导致狭窄,狭窄均位于输尿管中上段.术前经过CTU、输尿管造影等确诊.置入8/9.8F输尿管硬镜至狭窄远端,观察患侧输尿管了解管径大小,弯曲程度及病变部位等情况,置入360 μ m钬激光光纤,激光功率调至30-
过渡金属硫化合物二维半导体纳米材料因其独特的电子学、光子学等性质在光学器件和光电器件领域表现出潜在的应用前景.然而,目前基于MoS2等二维半导体材料非线性光学性能的研究大都集中在液相剥离得到的纳米片分散液上,不利于器件化.因此,从实用角度出发,开发低成本、大尺寸二维半导体薄膜是一个亟需解决的问题.此外,纯二维半导体薄膜的制备还可以排除溶剂或聚合物等的影响,为研究材料本征非线性光学性能提供机会.
采用电子束蒸发技术在K9、石英非晶以及晶体单晶和激光陶瓷多晶基底上沉积了HfO2薄膜,使用X射线衍射仪、原子力显微镜测试手段对薄膜的微观结构进行了研究。实验结果表明:HfO2薄膜在四种基底上均呈现多晶态,均沿m(020)择优生长,晶体基底上薄膜的衍射峰最多,陶瓷基底上择优衍射峰强度最强;四种基底上薄膜的晶粒大小相差不大,但陶瓷基底上薄膜结构排列比较疏松。
会议
In article is presented the description of developed by our Scientific and Technical Centre "AVATARA"of the new applied direction of the Wind Power,which use not used earlier in Wind Power the Thermob
Reliability is now one of the hottest topics in the China wind industry.One urgent issue some China wind developers are facing now is how to improve the reliability of their existing fleet,esp.the fle
会议