Analysis of Thermal Response of Circular Plate under Locally Uniform Heat Flow

来源 :中国计算力学大会2018暨国际华人计算力学大会2018 | 被引量 : 0次 | 上传用户：tinacat

【摘要】

：

　　Analytical method and finite element method were used to study local temperature rise,deformation and thermal stress response of a thin plate under local un

【作者】

：

Jing-yi LIU Chao-ya ZHANG Lian-chun LONG

【机构】

：

CollegeofMechanicalEngineeringandAppliedElectronicsTechnology,BeijingUniversityofTechnology,Beijing1

【出处】

：

中国计算力学大会2018暨国际华人计算力学大会2018

【发表日期】

：

2018年8期

【关键词】

：

Thermal bending of circular plates Thermal stresses Boundary conditions Irradiat

下载到本地 , 更方便阅读

下载此文赞助VIP

声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架

论文部分内容阅读

　　Analytical method and finite element method were used to study local temperature rise,deformation and thermal stress response of a thin plate under local uniform heat flow.Based on the thermal bending theory of thin plates,the expressions of deflections and thermal stresses are obtained under the local uniform heat flow.

其他文献

Numerical Simulation for Plastic Behavior of Graingraded Aluminum

　　Shot peening is one of the surface strengthening technologies to enhance the resistance of fatigue and stress corrosion by grain refinement.

会议

Voronoi diagramPolycrystal AluminumCrystal Plasticity

An identification of vibration modes of quartz crystal plates in a thermal field with the energy cal

　　Finite element method(FEM)is well received in analysis of high frequency vibrations of quartz crystal plates in thermal field based on Mindlin high-order th

会议

Quartz crystalStrain EnergyKinetic EnergyThickness-ShearVibrations

Recent Developments in the New Method Based on Independent Covers for Analysis of Beams,Plates and S

　　Aiming at the fundamental problems existing in current numerical methods for the analysis of beams,plates and shells,such as,in FEM,the difficulty of constr

会议

Analysis for beams plates and shellsExact geometrySelf-locking problemsNumeri

Numerical simulation of crack propagation and branching in ultra high toughness cementitious composi

　　In this paper,the peridynamic(PD)analysis of the bond-based dynamic brittle crack propagation and branching of Ultra High Toughness Cementitious Composites(

会议

PeridynamicFatigue loadDynamic brittle fracturesCrack propagation and branchi

Numerical Simulation for the Damage Behavior of Additive Manufactured Aluminum with Pore Defects

　　Additive manufacturing technology plays an important role in the development of the modern industry,additive manufactured aluminum(Al)becomes the hotspot of

会议

Additive manufacturingAluminumCrystal plasticityPore defects

Code_aster - An EDF open-source software to solve advanced structural problems

　　EDF is an international utility with a large fleet of nuclear reactors,including 58 in France only.EDF must ensure with credibility and in the long run the

会议

FEAnumerical codestructural mechanicsopen source

复合材料泡沫夹芯壁板压缩稳定性研究

　　研究泡沫夹芯壁板压缩稳定性及后屈曲承载能力对结构减重设计具有重要意义。本文基于连续介质损伤力学及黏聚区模型，建立了泡沫夹芯壁板在压缩载荷作用下的屈曲及后屈曲渐

会议

泡沫夹芯壁板复合材料屈曲有限元方法渐进损伤

高压预冷器中换热管非线性失稳及后屈曲分析

　　为确定预冷器在水压试验中严重变形原因，分别取不同接触状态的换热管为研究对象，基于大变形假设，采用点、面接触建立含大量接触约束的非线性有限元模型。研究横向变形以及内

会议

换热管非线性失稳非线性稳定法后屈曲分析临界载荷

腐蚀-疲劳耦合作用下桥用钢丝细观损伤演化的仿真研究

　　桥梁拉索长期承受交变载荷并暴露于自然环境中，腐蚀疲劳破坏是其典型的失效模式之一。为了探究索用钢丝的腐蚀疲劳破坏全过程，本文从点蚀加速裂纹成核的机理出发，结合元胞自

会议

钢丝腐蚀-疲劳自动元胞技术损伤演化

Dynamic behaviour of a bolted joint subjected to torsional excitation

　　The dynamic behaviour of a bolted joint excited by torsional excitation is studied using experimental and theoretical methods.Firstly,hysteresis loops of th

会议

Bolted jointTorsional displacementHysteresis loopRelative slippageDissipated

Analysis of Thermal Response of Circular Plate under Locally Uniform Heat Flow

与本文相关的学术论文