【摘 要】
：
In the surface layer of Ti-6Al-4V titanium alloy bar produced by cryogenic burnishing,reduced surface roughness,refined grain structure,and an obviously improved corrosion resistance are achieved.
【机 构】
：
th Lab of the School of Material Science and Engineering,Beijing University of Aeronautics and Astro
【出 处】
：
国际腐蚀工程大会(ICEC2016)
论文部分内容阅读
In the surface layer of Ti-6Al-4V titanium alloy bar produced by cryogenic burnishing,reduced surface roughness,refined grain structure,and an obviously improved corrosion resistance are achieved.
其他文献
Nuclear power plants have used the austenitic stainless steels extensively for heat exchanger tubing,internals of the reactor and the valves since the steels have good mechanical properties including
To improve the corrosion resistance of uranium,amorphous Al-Mn coating was electrodeposited from MnCl2-AlCl3-1-ethyl-3-methylim-idazolium chloride(MnCl2-AlCl3-EMIC)ionic liquid at room temperature.
This paper mainly focuses on the corrosion problem of tubing,casing and pipe materials for high sour gas field environment with high temperature/high pressure and high content of H2S/CO2.
With the progress of cleaning energy,more and more offshore wind structures have been used in marine corrosion environment.However,different from land wind power facilities,the offshore wind structure
Organic zinc-rich primers have been an established technology since the 1960s.But back in 2007,Hempels R&D team discovered that only around one-third of the zinc in a standard zinc epoxy coating has a
Layered double hydroxides(LDHs)have attracted great attention as potential protective films on metal substrates.They can be expressed by the general formula [M2+1-xMx3+(OH)2]x+[A-nx/n]·mH2O,where the
In this talk,we try to introduce the audience a new generation of pretreatment layer for an organic coating system---electrodeposited silica(e-SiO2)film,which was originally proposed in our laboratory
This study concerns the passivation capacity and corrosion resistance of reinforcing steel in ordinary Portland cement(OPC)extract and alkali-activated slag(AAS)extract with chlorides.
With the growing attention of the exploitation and utilizing of ocean resources,the corrosion and protection issues of metals have become one of the most urgent targets for modern marine industrial ap
On the basis of mechanism of cement mortar and concrete,the author has developed a new corrosion-resistant mortar based on cement,which has excellent corrosion-resistant properties to acid,alkali,sulf