Interaction of Two Burning Drops along the Stream Direction

来源 :13th International Conference on Liquid Atomization and Spra | 被引量 : 0次 | 上传用户:j482a3710rs
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  The interaction of two burning drops along the stream direction was studied experimentally using a freefalling drop apparatus which provided different initial drop diameter(di)and initial drop spacing(Si)for the dodecane fuel.Three initial drop diameter,di = 500,700,900 μm,and three initial dimensionless drop spacings,Si = 2.5,5 and 10,were considered in the experiment.In the combustion chamber,the initial gas velocity of the hot flow was estimated at 2.5m/s and the oxygen concentration(ΩO2)was controlled at 21%.The temperature of combustion chamber was decreased from about 900 ℃ to 400 ℃ with x = 7 to 85 cm.Results showed burning characteristics of two dodecane drops were affected by thermal expansion of individual drop flame and flow convection of the surrounding gas flow in the combustion chamber.The flame transition could be categorized into four modes.Mode 1 showed both drops with individual wake flame moving downward along the same axis when Si > 10.In mode 2,two drops similar to mode 1 moved downward out of the same axis.Two drops with a wake flame located at the downstream of the trailing drop moving downward along the same axis was mode 3.In mode 4,two drops similar to mode 3 moved downward out of the same axis.Merging collision was not observed for two dodecane drops in this experiment.
其他文献
A reliable and energy-saving engine system deeply depends on a large degree of the optimal control of fuel injection,ignition,and fuel/air mixing process in the combustion chamber.In the last two deca
Bioethanol fuel is in the spotlight as an alternative fuel of gasoline because of the problem of air quality deterioration in urban environment and energy conservation.In addition,global vehicle emiss
In this paper,various fuels including n-hexane,pure ethanol,and ethanol blended with 4.9%of deionized water are used to characterize the spray of multi-hole fuel injectors for spark-ignition direct-in
Flash-boiling spray has been studied extensively to demonstrate as a potential solution to many existing issues in direct injection gasoline engines with desirable spray characteristics,such as shorte
Turbulent cavitating flow in the nozzle of a fuel injector for diesel engines strongly affects the atomization process of the injected spray.It was clarified that a cavitation cloud in a vortex shed f
The influences of asynchronous intake valve timings on in-cylinder flow motions and mixture formation in a four valves single cylinder port fuel injection engine operating with iso-octane were examine
Liquid jet in crossflow finds direct applications in different engineering fields,more specifically in the aerospace industry and gas turbine engines.This article presents Volume-Of-Fluid based numeri
In the present work we investigate the growth of single vapor bubbles under conditions which are typical for flash evaporation.The Discontinuous Galerkin approach is used to solve for the Euler equati
Kerosene fuels such as Jet-A and JP-8 are traditionally used in gas turbines and jet engines.Recently,these fuels are also considered for ground vehicles utilizing diesel engines.The spray combustion
In case of an accidental leakage of liquefied gas(butane,propane,ammonia,…)due to a vessel breach or a line rupture,a thermodynamic flashing liquid jet can be observed.This phenomenon leads to a viole