【摘 要】
：
Methane can be converted to chemicals and fuels in two ways, either via synthesis gas or directly into C2-hydrocarbons or methanol.Today, almost all commercial processes for large scale natural gas co
【机 构】
：
Department of Chemical Engineering, Norwegian University of Science and Technology (NTNU),Sem Saelan
【出 处】
：
the 4th International Conference on Structured Catalysts and
论文部分内容阅读
Methane can be converted to chemicals and fuels in two ways, either via synthesis gas or directly into C2-hydrocarbons or methanol.Today, almost all commercial processes for large scale natural gas conversion involve synthesis gas as an intermediate although other processes for converting methane also exist [1].Synthesis gas is converted to methanol, Fischer-Tropsch products etc.in large units.However, many applications such as offshore production could benefit from compact and modular conversion technology.Limitations in space and weight as well as demanding conditions on site, call for highly integrated, compact, light-weight and safe technology.Microstructured reactors have the potential to meet such requirements.Conversion of synthesis gas made from biomass, could be another area of interest for microstructured reactors.
其他文献
Catalytic combustion of methane has been extensively studied as an alternative to conventional thermal combustion and abatement of methane emissions from lean-bum natural gas vehicles.Palladium-based
The atmospheric concentration of CO2 has been reported to increase each year by about 2 ppm[1].The significant rise in atmospheric CO2 levels resulting from the combustion of fuels is one of the prima
Due to kinetic and thermodynamic limitations, dedecane dehydrogenation has to be carried out at high temperature, which require stable and effective heat source.The novel metal monolith catalysts offe
1 Introduction The Mn-Ce mixed oxides catalytic system is the hot research issue because of their wide range of applications as catalysts for elimination of automobile exhaust, VOCs (volatile organic
Direct ammonia fuel cell (DAFC) as a possible alternative energy usage has increasingly attracted more concerns of the researcher.For promoting the effectiveness of the fuel cell system, high-performa
Hydrogen production, storage and supply for use in road transport as well as energy saving and process intensification in chemical industries led to study multifunctional reactors such as heat exchang
Introduction: Diesel engines produce nitrogen oxides and soot [1].One way for decreasing these emissions is the combination of filters and traps.The catalytic filter traps the soot particles and allow
Proton-exchange membrane fuel cells (PEMFCs) have been widely developed because of its high efficiency, compactness and reduction of air pollutants emissions [1].While introducing fuel cell systems in
Selective catalytic reduction (SCR) of NO with NH3 is a well proved technology for NO removal from flue gas.Honeycomb cordierite based CuO/Al2O3 is one of potential catalysts to replace industrilized
Introduction The pollution of groundwater with nitrates resulting from the use of fertilizers, or other natural sources, is becoming a major environmental problem.Selective catalytic reduction of nitr