【摘 要】
：
With the development of lighting technology,high-power white LEDs will become the future mainstream technology.At present,there are still many problems in optical stability,reliability,heat dissipatio
【机 构】
：
Key Laboratory of Physical Electronics and Devices of Ministry of Education(China)and Shaanxi Provin
【出 处】
：
2014年光子与光学工程国际会议暨西部光子学学术会议
论文部分内容阅读
With the development of lighting technology,high-power white LEDs will become the future mainstream technology.At present,there are still many problems in optical stability,reliability,heat dissipation.This paper focuses on the optical properties of vertical high-power white LEDs.The measurement results of the luminous flux output,correlated color temperature and color coordinates of the white and blue LEDs after 1100 hours of aging life testing under the drive current of 350 mA show us that the color coordinates of the white LED changed from(0.3362,0.3700)to(0.3359,0.3698)and shifts to the blue color coordinates direction.The luminous flux output of the white LED is declined from 95.002lm to 93.046lm.The color temperature declines from 5403k to 5383k.After the rapid temperature changes,the aging speed of white LED is faster than the blue LEDs.Analyzing the results,it can be concluded that phosphor aging rate greatly affects the optical stability of the device,how to improve the stability of phosphor is the key to improve optical stability for the vertical high-power white LED.
其他文献
为了研究一种新型压力调节阀的流量特性,本文采用计算流体力学CFD的方法对调节阀内部流场进行数值模拟仿真,并由仿真结果分析得出该阀的理论流量特性曲线,并通过试验证明其合理性.结果表明,该新型压力调节阀的流量特性曲线为近似快开型.
预应力锚索、抗滑桩以及抗剪洞是目前潜在不稳定边坡的主要治理措施,但是在目前的研究中,对这三种边坡加固处理措施的联合加固机理与抗滑作用发挥机制研究还较少.为了进一步研究各加固措施在破坏过程中的时间效应、空间效应及协同作用规律,本文开展了开展了边坡加固措施联合作用室内模型试验研究.通过进行不同的边坡加固措施(锚索、抗剪洞、抗滑桩)组合的模型试验,对边坡加固措施相互作用规律及分担机制进行了较为深入的研究
根据《建筑工程抗震设防分类标准》GB5223-28,体育馆属于重点设防类建筑.本文以北京石景山区某高校体育馆为工程背景,该体育馆多层楼板局部大开洞造成、夹层多、刚度突变,质量不均匀.本文借助Sap2000,基于弹性理论(模态分析方法、反应谱分析方法),通过三个引例分别讨论了单斜杆对单层单跨结构抗侧刚度的贡献以及支撑的布置方式、形式对结构抗侧刚度的影响.研究了抗侧力构件剪刀型支撑设置对该多层钢结构体
For a checkerboard depolarizer containing random polarization cell,we statistically analyse its modulation behaviour to partially coherent incident rays.Within the framework of 2? coherence matrix,the
The ultrafast laser polishing technology is a new surface processing technology in recent years.Because this technology has the characteristics of the polishing quality and less heat effect,it is very
High dimensional statistical signal processing is revisited with the aim of introducing the concept of vector signal representation derived from the Riesz transforms,which are the natural extension an
Electromagnetic waves can be described as the gradient of a potential,and will therefore have zero curl.Recently(e.g.Johannes Courtial,Glasgow University)has been able to construct optical elements th
Transmission is one of the most important parameter for optic materials which should be measured carefully as its value is related to optic design and optic material manufacture.Commonly,an optic syst
The Ⅲ-Ⅴ nitride material such as InN GaN has many favorable physical properties including a wide direct band-gap(0.7-3.4eV),high absorption coefficients(105cm-1),and high radiation resistance.InGaN ha
A new manufacture technique of micro-lens solidified on needing positions dynamically using optic glue is suggested.It is formed directly on positions where the micro-lens needs to be mounted.This tec