【摘 要】
：
In this study, we investigated different spinning processes to electrical resistance properties of anti-static polyester fiber.We demonstrated that using sheath/core cross-section of bicomponent fiber
【机 构】
：
Department of Raw Materials and Yarn Formation,Taiwan Textile Research Institute,No.6,Chentian Rd.,T
论文部分内容阅读
In this study, we investigated different spinning processes to electrical resistance properties of anti-static polyester fiber.We demonstrated that using sheath/core cross-section of bicomponent fiber processing can significantly improve the electrical resistance and mechanical properties of anti-static polyester fiber when its spinning speed is more than 2000 m/min.When the ratio of the sheath/core polymers of the anti-static fiber is 40/60, it has the electrical resistance of ~2X 106Ω/cm, the tenacity ~ 1.9 gf/d, and elongation of~ 150%.To further study these interesting behavior, we will systematically investigate the electrical resistance property and the filter analysis of anti-static polyester chip.In addition, we will examine the cross-section, electrical resistance properties, and mechanical properties of anti-static polyester fiber specimens.
其他文献
Shape-Memory Polymers (SMPs) are being investigated for practical use as deployable space structures, such as large antennas and long booms.Since SMP is a polymeric material, it does not have enough s
An investigation has been carried out concerning the influence of water absorption on the mechanical properties and fatigue properties of carbon fiber/polyamide (CF/PA) composites.Tensile and tension-
Fiber reinforced polymer (FRP) wrappings are employed to upgrade the bridge piers of infrastructures.The bridge pier might subject to stone impact resulting from the muddy flow or rain storm.An energy
Recently, stable junctions can be directly synthesized through a floating catalyst CVD technique to link the carbon nanotubes into a reticular netwrok named reticular carbon nanotube (r-CNT).An r-CNT
The nanoscale material carbon nanotube (CNT) has been widely investigated due to its ultrahigh Youngs modulus, thermal conductivity, and other notable properties.This study seeks to employ model to in
Carbon nanotubes (CNTs) have been considered as the most promising material as they find applications in a variety of technological fields.So far, the plethora of theoretical and experimental investig
In this article, the second generation Polyimide (Polyimide-Ⅱ, PⅠ-Ⅱ) was chosen in this research to study interfacial and heat resistant properties of T700/PⅠ-Ⅱ (carbon/PⅠ-Ⅱ) and S2/PⅠ-Ⅱ (High-strengt
The comprehensive perfermance of three kinds of surface preparation systems of polyurea coatings for Beijing-Shanghai High-Speed Railway bridge concrete beams protection both in situ and in lab were s
Syntactic foams are hollow particle filled composites, and have many useful characteristics, i.e.low density, high stiffness compared to normal foams and low thermal and electrical conductivity.It is
Dispersions of few-layer graphene nanosheets (FLGs) in ethanol were prepared for the first time utilizing ultrasonic-treatment of HNO3 modified-expanded graphite in ammonia-ethanol solution.This treat