Characteristics And Durability Of Magnesium Phosphate Cement

来源 :The 8th International Symposium on Cement & Concrete(ISCC 20 | 被引量 : 0次 | 上传用户:ly0496lf
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  The cement were prepared by mixing dead-burned magnesia(M),and mono-potassium phosphate(mPP),with/without fly ash; in addition,borax(B)and di-potassium phosphate(dPP)were used as the retarders.The durability of MPC were investigated by means of strength,weight loss,the linear expansion rate,XRD,scanning electron microscope and pore structure analysis.
其他文献
In this paper,the Liu and Bao steel slag were reconstructed by Reduction FeOx.Direct reduction and melting reduction experiment were respectively taken Methods such as XRD,SEM-BEI and so on were used
The effect of different magnesium content on the carbonation efficiency of calcium hydroxide and the carbonated 37conditions was investigated in this paper.The solid carbonation method has been used i
The changes of free water amount,rheological properties and electrokinetics of cement paste were examined by varying superplasticizers added to the cement paste,while different types of grinding aids
This paper presents the results of the investigation on influence of barium oxide on composition of Portland cement minerals.It is established that 25%of added barium oxide are in belite and 75%-in al
Using the waste clay brick(WCB)as siliceous materials to produce cement clinker.The heating temperature of raw materials ranged from 1250℃,1300℃,1350℃,1400℃ to 1450℃,and the sintered time was kept in
The effect of two kinds of ground limestone fillers on workability and the strength development of cement and the concrete are studied.It finds the blain and the dosage of limestone filler are the two
A M3 modification of tricalcium silicate(C3S)solid solution was investigated using transmission electron microscopy(TEM).Selected area electron diffraction(SAED)patterns and high resolution transmissi
Reducing emission of CO2 is the most important mission in cement industry.And cement industry must contribute to recycling by utilization of industrial waste and by-products as raw materials or fuel.R
The main aims of this study to investigate the influences of silica fume addition on the physico-mechanical properties of magnesia cement pastes mixed by seawater.Four mixtures(M1,M2,M3 and M4)were pr
In order to improve the durability of concrete structure,the cases where curing agent or surface modification agent be applied on the concrete surface after de-molding has increased.In this research,t