【摘 要】
：
In this study an experimental investigation of the drop size and velocity distributions of an aerated liquid injector spray in subsonic crossflow is described.The test conditions for this study includ
【机 构】
：
Mechanical and Aerospace Engineering,Oklahoma State University,U.S.A.
【出 处】
：
13th International Conference on Liquid Atomization and Spra
论文部分内容阅读
In this study an experimental investigation of the drop size and velocity distributions of an aerated liquid injector spray in subsonic crossflow is described.The test conditions for this study include injector exit diameter of 1 mm,crossflow Mach number of 0.3,momentum flux ratio of 5,and gas-to-liquid mass ratio of 8%.Double pulsed digital holography was used to investigate the spray characteristics at downstream distances of 50,and 100 jet diameters(d0).The holograms are reconstructed into slices and analyzed using image-processing algorithms to yield information about the drop sizes and drop velocities.Four different drop size distributions are tested: the normal distribution,the Rosin-Rammler distribution,the log normal distribution,and the Simmons universal root-normal distribution.It was found that the log normal distribution best quantified the data obtained in this study.The drops streamwise and cross stream velocities at a downstream distance of x = 50 d0 were found to be still evolving.The crossflow drop velocities converged to almost uniform velocity at x = 100 d0.
其他文献
Jets of non-Newtonian liquids are present in many technical applications from agriculture over food processing to medical applications.We use our in-house multiphase Computational Fluid Dynamics code
For a horizontal gas layer overlaid by a liquid layer under gravity,round-ended air columns penetrate into the liquid at a constant velocity.This classical problem is revisited to gain new physical in
The present work focuses on numerical investigation of the transient spray characteristics for n-octane liquid fuel issuing from a pressure-swirl atomizer into the ambient atmosphere.The computations
Whilst the physics of both classical evaporation and miscible fluid mixing are reasonably well characterized and understood in isolation,little is known about the transition from one to the other in t
The shape of microscopic fuel droplets may differ from the perfect sphere,affecting their external surface area and thus the heat transfer with the surrounding gas.Hence there is a need for the charac
In order to improve the spatial distribution of spray and enhance the mixture formation quality for the diesel engines,a partition combustion system with double ω-type combustion chamber was proposed.
A turbulent characteristic in diesel sprays were investigated to gain more insight into its effect on spray structure and microscopic mixing.Non-evaporating diesel sprays were injected into inert cons
Effect of the ambient O2 concentration and the injection duration on the spray combustion characteristics of diesel fuel was experimentally examined in this study.The detailed combustion characteristi
Butanol,in comparison with ethanol,has more similar properties of current transportation fuel.These means it has a potential of being a more suitable blend for use in diesel engines.Unfortunately,buta
The focus of the present article is to study the effect of liquid jet injection velocity profile on the structure of liquid jet in crossflow(JICF).The experiments are conducted over a range of liquid-