Dynamic Seal Performance-Critical Requirement of Automotive Gear OilChina Gear Oil Development

来源 :2014大连润滑油技术经济论坛暨C-SAE汽车燃料与润滑油分会第十六届年会 | 被引量 : 0次 | 上传用户:QQ2009sunboy
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
  Driveline durability including transmission and axle remains as a major focus for automotive manufactures and Original Equipment Manufacturers (OEMs).Majority driveline failures are related to gears,bearings,seals and synchronizers.Recent Lubrizol market survey indicated that in China 40% of field failures of manual transmissions are related to synchronizer,38% of manual transmission failures and 40% of axle failures are related to seal.To enhance driveline components durability and extend vehicle life Lubrizol has developed a new automotive gear oil technology,which is referred to as CHINA GL-5 PLUS,and is a well-balanced total driveline lubricant (TDL) additive technology for manual transmissions and axles.This new technology can significantly improve seal and synchronizer performance and durability on top of extended gear and bearing life and protection.In this paper we present an experimental study to demonstrate the significant performance improvement by using CHINA GL-5 PLUS.Experimental procedure has taken into consideration of majority Chinese customer usage on the road during test duty cycle design.The experiment also used a typical GL-5 fluid as baseline for comparison purpose.The test results showed that CHINA GL-5 PLUS representing a new level of gear oil performance has superior seal protection with extended service life compared with a typical API GL-5.
其他文献
本文讨论并提出高炉炉缸热工设计的一个新准则,该准则以内村临界厚度大于等于内衬安全厚度为特征.在简化的基础上,根据传热学理论和结构力学-强度理论,推导了内衬临界厚度、
电火花成形机床工作液循环系统是机床的重要组成部分,工作液泵是工作液循环系统的核心部件.本文通过分析电火花成形加工对工作液循环系统的液位、液温、冲抽液压力和工作液洁
以刚玉(α-Al2O3)、优质高铝矾土熟料(Al2O3含量大于87%)、天然鳞片石墨等为原料,加入细粉添加物(Si),利用微孔化技术制备出碳复合砖,采用化学分析、X射线衍射仪、扫描电子显
钢铁企业是耐火材料的最大市场,耐火材料百分之七十左右的需求来自钢铁企业.近年来国内很多钢铁企业用招标的方式来确定耐火材料供应商和供货价格,钢企如何做好耐火材料的招
地震工程模拟开放平台OpenSEES在美国已广泛用于土木工程的相关科研项目中,较好地模拟了包括钢筋混凝土结构、桥梁、岩土工程在内的众多实际工程和振动台试验项目,证明其具有
本文用ANSYS模拟残余应力和板件几何初始缺陷,考虑腹板和翼缘屈曲的相关性,对强翼缘弱腹板和弱翼缘强腹板两组H形截面轴压钢构件进行弹塑性局部屈曲分析.讨论腹板宽厚比、翼
按照1SO4925:2005-Class 6/GB 12981:2012 HZY6以及OEM标准C71的要求研制了Class 6合成制动液,具有优异的低温性能、优良的高温性能、金属适应性能、橡胶相容性,并且在某汽车
在两型进口船用发动机上应用国产CH-4 15W-40柴油机油替代进口原用柴油机油进行了对比实装试验.分析了进口油品和替代油品的100℃运动黏度变化率、酸值增值、碱值下降率、闪
受环保、油价上涨等因素影响,目前汽车行业对降低油耗的需求越来越迫切.新型润滑油成为降低整车油耗的一种低成本途径.但由于润滑油对整车油耗降低程度通常不超过2%,这就对测
详述了研制薄层防锈油的过程,根据微小型五金工具封存防锈的要求,通过对基础油、成膜剂、防锈剂等添加剂复配的研究,研制出了薄层防锈油.该防锈油具有一定的防锈作用,并经过