SiO2气凝胶/全氟磺酸树脂杂化薄膜制备及其吸附性能测试

来源 :2014中国溶胶-凝胶学术研讨会暨国际论坛 | 被引量 : 0次 | 上传用户:svkisahero
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
吸附材料广泛应用于空气净化、污水处理、化工提纯、医药过滤、海水淡化等领域.采用双连续孔道结构的无机化合物如:二氧化硅,二氧化钛以及他们组成的复合材料可以吸附重金属、放射性物质的污染.我们在前期的研究中发现,虽然该材料能够达到80%以上的吸附效率,但是其吸附过程主要为物理吸附和表面氢键的作用,其吸附温度性仍有待提高.
其他文献
Alumina aerogels were prepared by an acid-base two step sol-gel synthetic route using aluminum tri-sec butoxide as precursor and nitric acid/ammonia as acid/base catalysts, followed by drying with sup
Hydrogen detection has fundamental significance.Optical type sensor has a favorable prospect of development because of its Security and Sensitivity.In our works, Sol-Gel method combined with dip-coati
In this report we demonstrate the synthesis of homogeneous metal-silicon mixed-oxide composite aerogels via a propylene oxide pre-reaction method, in which different colloidal particles together cross
Nickel oxide (NiO) and reduced graphene oxide (RGO)/NiO composite were synthesized by the hydrothermal method followed by calcination in air.The reduction of graphene oxide (GO) happened in a one step
Nanoribbon-like manganese oxide (MnO(OH))/carbon composites were synthesized through hydrothermal methods at 150 ℃ for 6 h.The MnO(OH) is in diameters of 4-8 nm and lengths up to several micrometers.T
TiO2-C composite films are prepared by a sol-gel process.A soluble organic compound,salicylic acid, coupled with a quasi-crystallized benzene ring structure is served as carbon sources,resulting in a
近年来,类石墨状氮化碳(g-C3N4)作为一种新型的可见光催化材料受到了广泛关注,但其较低的比表面积和量子效率制约了其进一步发展[1-3]。本文采用超声工艺与水热制备方法相结合,在无模板剂条件下制备出多孔g-C3N4材料,通过X射线衍射、傅里叶变换红外光、扫描电镜、紫外-可见漫反射光谱等表征手段,系统研究了超声时间、水热条件等对其晶体结构、功能基团、形貌以及光吸收性能的影响,并考察了多孔g-C3N
类石墨氮化碳(g-C3N4)是当前光催化材料研究的热点之一[1-4].本文采用缩聚法合成了类石墨氮化碳(g-C3N4),利用球磨工艺对g-C3N4进行了初步细化,并在水热条件下制备出多孔g-C3N4.以多孔g-C3N4为基底,在其表面生长BiOBr,成功合成出可见光响应的g-C3N4/BiOBr复合光催化材料.通过X射线衍射(XRD)、扫描电子显微镜(SEM)、傅里叶红外光谱(FT-IR)、紫外-
Poly (lactic acid) (PLA) melt-blown webs were melt-spun by melt-blown processing in our the research.The effect of die-to-collector distance (DCD) on the structure and properties PLA MB webs was repor
The objective of the study is to compare Ag/Al2O3 catalysts prepared by Sol-Gel Method and Reaction Synthesis Method.And the catalysts are characterized by XRD and TEM techniques.The results shows the