【摘 要】
：
In order to study the effects of the confining pressure on the erosion characteristics of the self-resonating cavitating jet under wellbore and deep-water conditions,experiments are conducted on aluminum specimens impinged by the organ pipe cavitation noz
【机 构】
：
School of Petroleum Engineering,China University of Petroleum,Qingdao 266580,China;Huanghe Drilling
论文部分内容阅读
In order to study the effects of the confining pressure on the erosion characteristics of the self-resonating cavitating jet under wellbore and deep-water conditions,experiments are conducted on aluminum specimens impinged by the organ pipe cavitation nozzle and the conical nozzle with the confining pressure in the range 0 MPa-10.0 MPa.Meanwhile,through the numerical simulation of the collapsing process of the cavitation bubble and the noise test,the cavitation erosion mechanism is analyzed.The experimental results show that the optimal standoff distance and the confining pressure can be obtained for the maximum erosion quantities,and the optimal standoff distance is 5 to 7 times greater than the equivalent nozzle outlet diameter and the confining pressure is about 2.0 MPa.Under the same conditions,the erosion caused by the cavitation nozzle is up to 2 times larger than that caused by the conical nozzle.According to the numerical simulation and the noise test,the cavitation erosion on the aluminum specimens is mostly caused by mechanical forces due to the high-frequency pressure pulse generated during the collapse of cavitation bubbles,while just a small part is caused by micro-jets.
其他文献
Recently,a new definition,called Rortex,was proposed to quantify the purely rotational motion of fluids.In this work,based on the DNS data,the Rortex is used to assess and visualize the rotational motion and structure of the vortex in swirling jets in com
To solve the problem of inaccurate boundary identification and to eliminate the spurious pressure oscillation in the previously developed immersed smoothed point interpolation method (IS-PIM),a new sharp-interface IS-PIM combining mass conservation algori
The flow structure and the unsteady mechanism of the unsteady cavitating flow are reviewed in this paper.The flow patterns and structures in different cavitation regime,for the attached cavitation and the vortical cavitation,are shown with both the visual
The wave parameters (the wave height and period) are important environmental factors in the ocean engineering design.General numerical wave models,such as SWAN and WAVEWATCH,are widely employed to simulate the wave conditions.However,significant differenc
This paper studies the unsteady three-dimensional cavitating turbulent flow in a jet pump.Specifically,thefocus is on the unstable limited operation stage,and both the computational and experimental methods are used.In the experiments,the distribution of
Nowadays the rapidly developing artificial intelligence has become a key solution for problems of diverse disciplines,especially those involving big data.Successes in these areas also attract researchers from the community of fluid mechanics,especially in
The wave transformation over slope topography is widely studied,but most of studies are for common coastal slopes.This paper presents an experimental study of 2-D regular and irregular wave transformations on a simplified coral reef with a steep slope of
In this paper,several commonly used vortex identification methods for marine hydrodynamics are revisited.In order to extract and analyse the vortical structures in marine hydrodynamics,the Q,λ2-criterion and modified normalized Liutex/Rortex (Ω)R method a
The hydraulic resistance of the river ice jams consists of the resistances due to the seepage flow through the jam and the shear stress on the undersurface of the jam.Existing empirical formulations consider only the the undersurface resistance of the jam
In-depth analyses of existing direct numerical simulations (DNS) data led to a logical and important classification of generic turbulent boundary layers (TBLs),namely Type-A,-B and -C TBL,based on the distribution patterns of the time-averaged wall-shear