为实现激光二极管抽运全固态激光器(DPSSL)的小型轻量化和高效率,研究了采用高温激光二极管(LD,808nm,55℃)作为抽运源,降低温控系统制冷压力,减小传导冷却结构体积、重量、功耗的思路和方法。分析了激光二极管抽运全固态激光器中热电制冷器制冷量与激光二极管工作温度的关系,采用高温激光二极管阵列抽运源和角锥棱镜谐振腔设计了可靠性高、小型轻量化的全固态激光器,研制了工程化样机,激光器重复频率为50Hz,连续工作时间达6min,脉冲能量为85.7mJ,脉冲宽度为10.8ns,光束发散角为2.8mrad,电光效率为4.3%,体积为170mm×62mm×80mm,重量为1.1kg。研究表明,高温激光二极管抽运的全固态激光器是实现DPSSL小型轻量化和高效率的有效途径。 In order to reduce the size and weight of the laser diode pumped all-solid-state laser (DPSSL), a high-temperature laser diode (LD, 808nm, 55 ℃) was used as the pump source to reduce the cooling pressure of the temperature control system and reduce the conduction cooling Structure volume, weight, power consumption ideas and methods. The relationship between the cooling capacity of the thermoelectric cooler and the operating temperature of the laser diode in the all-solid-state laser diode laser pump is analyzed. The all-solid-state laser with high reliability, small size and light weight is designed using the high-temperature laser diode array pumping source and the pyramidal prism resonator , The engineering prototype was developed. The laser repetition frequency is 50Hz, the continuous working time is 6min, the pulse energy is 85.7mJ, the pulse width is 10.8ns, the beam divergence angle is 2.8mrad, the electro-optic efficiency is 4.3%, the volume is 170mm × 62mm × 80mm, weighs 1.1kg. The research shows that all-solid-state laser with high-temperature laser diode pumping is an effective way to realize DPSSL miniaturization and high efficiency.