【摘 要】
：
Particulate TiC reinforced 17-4PH and 465 maraging stainless steel matrix composites were processed by conventional powder metallurgy (P/M). TiC-maraging stainl
【机 构】
：
School of Material Science and Engineering
论文部分内容阅读
Particulate TiC reinforced 17-4PH and 465 maraging stainless steel matrix composites were processed by conventional powder metallurgy (P/M). TiC-maraging stainless steel composites with theoretical density ＞97% were produced using conventional P/M. The microstructure, and mechanical and wear properties of the composites were evaluated. The microstructure of the composites consisted of (core-rim structure) spherical and semi-spherical TiC particles depending on the wettability of the matrix with TiC particles. In TiC-maraging stainless steel composites, 465 stainless steel binder phase showed good wettability with TiC particles. Some microcracks appeared in the composites, indicating the presence of tensile stresses in the composites produced during sintering. The typical properties, hardness, and bend strength were reported for the composites. After heat treatment and aging, an increase in hardness was observed. The increase in hardness was attributed to the aging reaction in maraging stainless steel. The specific wear behavior of the composites strongly depends on the content of TiC particles and their interparticle spacing, and on the heat treatment of the maraging stainless steel.
其他文献
随着信息技术的集成化和网络化的不断发展,企业信息化程度不断提高。企业不仅运用内网实现了信息的共享,使企业组织整体高效运营,而且还与外部网络沟通,形成了互联网络。信息
The microstructure, mechanical properties, and misorientation of automobile beam steels produced by EAF-CSP process were studied using optical microscopy (OM) a
Ant colony optimization (ACO) algorithm was modified to optimize the global path. In order to simulate the real ant colonies, according to the foraging behavior
全员绩效管理是为了促进员工绩效提升并促进供电企业战略目标实现采用的管理方式。全员绩效管理是企业实现整体战略的强大的支撑,是转变企业管理模式的重要措施,有利于企业文
企业经济管理模式与企业效益密切相关,通过探索企业经济管理的规范化方法,不仅有助于为企业赢得更大的经济效益,推动企业的可持续发展,而且对现代企业经济管理制度的建立具有
Nanometer Ni0.5Zn0.5Fe2O4 powders with spinel phase were prepared by the hydrothermal method using purified FeSO4 solution from sodium jarosites slag as materia
In the process of 2-D compressional wave propagation in a rock mass with multiple parallel joints along the radian direction normal to the joints, the maximum p
Spherical cobalt carbonate with high tap density, good crystallization and uniform particle size was prepared by controlled chemical crystal method using cobalt
The lubrication effectiveness of the composite lubricants, 50wt% ethylene bis-stearamide (EBS) wax + 50wt% graphite and 50wt% EBS wax + 50wt% BN, during the pow
This article reports the study on acid equilibrium during bioleaching of alkaline low-grade copper sulfide ore.Adding auxiliary agents 1# (sulfur) and 2# (pyrit