【摘 要】
：
In a nuclear powerplant,the rotary equipment,such as a pump directly fitted with hanger in the piping system,experiences torsional and bending loads.Higher crack growth rate occurs because of this torsional load in addition to the bending load.Hence,it is
【机 构】
：
Department of Civil Engineering,Taipei University of Technology,Taipei 106-08,China;Fatigue & Fractu
论文部分内容阅读
In a nuclear powerplant,the rotary equipment,such as a pump directly fitted with hanger in the piping system,experiences torsional and bending loads.Higher crack growth rate occurs because of this torsional load in addition to the bending load.Hence,it is necessary to study the fatigue behavior of piping components under the influence of combined torsional and bending load.In this study,experimental fatigue life evaluation was conducted on a notched stainless steel SA312 Type 304LN straight pipe having an outer diameter of 170 mm.The experimental crack depth was measured using alternating current potential drop technique.The fatigue life of the stainless steel straight pipe was predicted using experiments,Delale and Erdogan method,and area-averaged root mean square-stress intensity factor approach at the deepest and surface points of the notch.Afterward,the fatigue crack growth and crack pattern were discussed.As a result,fatigue crack growth predicted using analytical methods are in good agreement with experimental results.
其他文献
The understanding of compressive and tensile behaviors of polypropylene fiber-reinforced cemented paste backfill (FR-CPB) play crucial roles in the successful implementation of reinforcement technique in underground mine backfilling operations.However,ver
In this study,data-driven methods (DDMs) including different kinds of group method of data handling(GMDH) hybrid models with particle swarm optimization (PSO) and Henry gas solubility optimization (HGSO) methods,and simple equations methods were applied t
This work reports the immobilization of zinc oxide (ZnO) nanostructures and gold nanoparticles (AuNPs) on cotton fabrics (CFs).The ZnO and AuNPs containing CF composite materials demonstrated excellent photocatalytic activity towards degrada-tion of the m
This research investigated a pavement system on steel bridge decks that use epoxy resin (EP) bonded ultra-high performance concrete (UHPC).Through FEM analysis and static and dynamic bending fatigue tests of the composite structure,the influences of the i
This study investigated the use of recycled tire-derived aggregate (TDA) mixed with kaolin as a method of increasing the ultimate bearing capacity (UBC) of a strip footing.Thirteen lg physical modeling tests were prepared in a rigid box of 0.6 m × 0.9 m i
Wearable gas sensors can improve early warning provision for workers in special worksites and can also be used as flexible electronic platforms.Here,the flexible multifunctional gas sensor was prepared by grafting graphene oxide (GO)-Ag onto cotton fabric
The effective notch stress approach for evaluating the fatigue strength of rib-leck welds requires notch stress concentration factors obtained from complex finite element analysis.To improve the efficiency of the approach,the notch stress concentration fa
In this paper,a half-plane time-domain boundary element method is applied to obtain the seismic ground response,including a subsurface box-shaped lined tunnel deployed in a linear homogenous elastic medium exposed to obliquely incident SH-waves.Only the b
The general discrete scheme of time-varying Reynolds equation loses the information of the previous step,which makes it unreasonable.A discretization formula of the Reynolds equation,which is based on the Crank-Nicolson method,is proposed considering the
摘要：农村小型农田水利设施的建设，能够解决农村耕地灌溉和人畜饮水的问题，可以起到调节和改善农田水分与区域水利条件的作用，从而促进农业发展。文章主要分析了农村小型农田水利设施建设存在的问题，并作出相应的解决措施。 关键词：水利设施、农业发展、解决措施 中图分类号： TV 文献标识码： A 引言 作为世界上人口最多的国家，如何解决粮食问题，一直都是我们国家关注的重点内容。经过多年的发展，尤其是