【摘 要】
：
The detrimental effects of carbides and porosity on the fatigue crack initiation and propagation of nickel-based single-crystal superalloys have been reported by many previous studies.However,few studies have quantitatively compared the fatigue damaging e
【机 构】
：
School of Materials Science & Engineering,Beijing Institute of Technology,Beijing 100081,China;Schoo
论文部分内容阅读
The detrimental effects of carbides and porosity on the fatigue crack initiation and propagation of nickel-based single-crystal superalloys have been reported by many previous studies.However,few studies have quantitatively compared the fatigue damaging effects of carbides and pores on the fatigue crack evolution.In this study,a high-resolution X-ray computed tomography (XCT) characterization of a DD5 nickel-based single-crystal superalloy during fatigue test was performed.The evolution of carbides,pores and cracks at all stages was observed and tracked.In order to quantify the 3D microstructures,a new damage factor that correlates the morphology of fracture surface with crack evolution behaviors was proposed.It was found that porosity was more detrimental than carbides in crack initiation and propagation during fatigue tests.Furthermore,pore spacing has been found to be the most significant factor among all controlling pore characteristics in the crack initia-tion stage and sphericity is the most critical pore characteristic in the crack propagation stage.Therefore,by statistically analyzing the evolution of carbides and pores during fatigue tests in this study,the underlying fatigue cracking mechanism of nickel-based superalloys is revealed,
其他文献
Isotropy in microstructure and mechanical properties remains a challenge for laser powder bed fusion (LPBF) processed materials due to the epitaxial growth and rapid cooling in LPBF.In this study,a high-strength TiB2/Al-Cu composite with random texture wa
YBa2Cu3O7-x (YBCO) is a kind of high-temperature superconducting material that has important application in information,energy,medical treatment,etc.,and the superconducting properties of YBCO are closely related to its internal microstructure.In this stu
The effect of thermoacidophilic archaeon Metallosphaera cuprina (M.cuprina) on the corrosion of Q235 carbon steel in its culture medium was investigated in this work.In the sterile culture medium,the carbon steels showed uniform corrosion morphologies and
It is widely accepted that further development of Pb-free solder alloys for improved processing and in-service properties of next-generation electronics,can be accelerated through a fundamental understanding of phase transformation and micro-structure con
通过对航空发动机16Ni3CrMoE钢制输出轴渗碳淬火后出现轴向长度缩短、内花键畸变的原因进行分析与研究.结果表明,热处理畸变主要影响因素是零件在渗碳、淬火工序中产生的热应力和组织应力的综合作用,渗碳零件表面和心部的成分存在差异,使热处理过程中的应力分布变得更不均匀和复杂.通过改变渗碳装炉方式、降低渗碳冷却速度、静油等温淬火、渗碳前增加稳定化处理等工艺方法,将零件的热处理畸变控制在工艺要求范围内.
采用OM、SEM、X射线应力分析、力学性能测试等手段,分析了感应淬火处理对42CrMo钢曲轴连杆轴颈截面组织和残余应力的影响,探讨了不同淬火功率对淬硬层形貌、显微组织和力学性能的影响.结果表明,42CrMo钢曲轴连杆轴颈截面由淬硬层、过渡层和基体3部分组成,淬硬层组织为均匀细小的马氏体,过渡层组织为马氏体和回火索氏体的混合组织,基体组织为回火索氏体.经感应淬火处理,42CrMo钢曲轴连杆轴颈表面残余应力由拉应力变为压应力,随着感应淬火功率的增加,淬硬层深度增加,组织不断细化,当感应淬火功率为2500 W,
对工作1200模次发生热疲劳失效的压铸模镶块进行失效机理分析,同时建立了压铸过程的热-力耦合数值分析模型,研究了镶块在压铸服役过程中温度场和应力场的演变规律,并对其寿命进行预测.结果表明,镶块的失效是由于压铸过程中受到高温铝熔液的冲刷和冷却液的急冷引起的热疲劳行为所致;在循环压铸过程中,镶块凸台转角处出现应力集中,最大等效应力约为788 MPa,热疲劳裂纹在该处萌生和扩展;采用低周疲劳寿命预测模型对镶块热疲劳寿命进行预测,镶块热疲劳寿命约为1651次,与镶块实际热疲劳寿命非常吻合,这表明本文建立的热-力耦
Fe-rich intermetallic phases in recycled Al alloys often exhibit complex and 3D convoluted structures and morphologies.They are the common detrimental intermetallic phases to the mechanical properties of recycled Al alloys.In this study,we used synchrotro
以贝氏体钢为研究对象,设计了4种热处理工艺,研究了不同热处理工艺下试验钢的显微组织及疲劳裂纹扩展速率.结果表明,热轧态试验钢的微观组织以粒状贝氏体为主,其上分布有少量的板条贝氏体、马氏体和粗大块状M/A岛,残留奥氏体的体积分数为16.2％,但稳定性较差,裂纹能够直接穿过粗大的块状M/A岛继续扩展,疲劳裂纹扩展速率最快.经900℃奥氏体化+空冷后,显微组织以板条贝氏体和马氏体为主,M/A岛仍为粗大的块状,残留奥氏体含量减少至12.3％,疲劳裂纹扩展速率略有降低.经900℃奥氏体化+380℃盐浴等温30 mi