【摘 要】
：
Optical interference is not only a fundamental phenomenon that has enabled new theories of light to be derived but it has also been used in interferometry for the measurement of small displacements, refractive index changes, and surface irregularities. In
【机 构】
：
CAS Key Laboratory of Quantum Information,University of Science and Technology of China,Hefei,Anhui,
论文部分内容阅读
Optical interference is not only a fundamental phenomenon that has enabled new theories of light to be derived but it has also been used in interferometry for the measurement of small displacements, refractive index changes, and surface irregularities. In a two-beam interferometer, variations in the interference fringes are used as a diagnostic for anything that causes the optical path difference (OPD) to change;therefore, for a specified OPD, greater variation in the fringes indicates better measurement sensitivity. Here, we introduce and experimentally validate an interesting optical interference phenomenon that uses photons with a structured frequency-angular spectrum, which are generated from a spontaneous parametric down-conversion process in a nonlinear crystal. This interference phenomenon is manifested as interference fringes that vary much more rapidly with increasing OPD than the corresponding fringes for equal-inclination interference;the phenomenon is parameterised using an equivalent wavelength, which under our experimental conditions is 29.38 nm or about 1/27 of the real wavelength. This phenomenon not only enriches the knowledge with regard to optical interference but also offers promise for applications in interferometry.
其他文献
The ability to quantify optical properties (i.e., absorption and scattering) of strongly turbid media has major implications on the characterization of biological tissues, fluid fields, and many others. However, there are few methods that can provide wide
2021年6月23日及10月26日,国际金属板材成形联盟(ICOSPA)召开了两次线上视频会议,暨2021年国际板材成形联盟夏季会议和第56届国际板材成形联盟会长会议.来自中国、德国、英国、法国、美国和日本金属板材成形及相关协会的代表参加了会议.rn新冠疫情在全世界范围内都造成了较大影响,会上各国协会的领导都交流了疫情对本国企业的影响及他们的应对措施,并介绍了各国金属板材成形行业的最新情况.小编对会议内容进行了翻译和摘录,不足之处,还请各位读者斧正.
兴迪源机械是集设计、开发、生产、销售、服务于一体的液压机械智能设备制造企业,公司以流体压力成形技术为核心,以内高压成形机、水胀成形机、板材充液成形机、内高压三通机等设备为主导产品.rn公司建有液力内高压成形机械工程技术研究开发中心,并与中国科学院金属研究所、南京航空航天大学等院校开展长期的产学研合作,密切关注国内外领先技术,紧紧围绕国家制造强国的战略规划,根据航空航天、汽车、核电、石化以及厨电等国民经济和国防建设的相关领域对高性能复杂薄壁金属构件(轻量化金属结构件)的重大需求,致力于解决液压成形、内高压成
Laser speckle contrast imaging (LSCI) is a powerful tool to monitor blood flow distribution and has been widely used in studies of microcirculation, both for animal and clinical applications. Conventionally, LSCI usually works on reflective-detected mode.
The exploitation of ultrafast electron dynamics in quantum cascade lasers (QCLs) holds enormous potential for intense, compact mode-locked terahertz (THz) sources, squeezed THz light, frequency mixers, and comb-based metrology systems. Yet the important s
内高压成形技术在现代汽车工业领域应用广泛.内高压成形与冲压焊接相比有如下优点:降低整车质量,实现轻量化;减少零件和模具数量,降低工装开发费用;可减少后续机械加工和组装焊接量;提高整车强度与刚度,尤其提高疲劳强度;提高材料利用率.rn内高压成形主要缺点:由于内压高,需要大吨位液压机提供合模压力;高压源及闭环实时控制系统复杂,造价高;由于成形缺陷和壁厚分布与加载路径密切相关,零件试制研发费用高,必须充分利用数值模拟进行工艺参数优化.
管材成形技术rn制管rn焊管加工流程包括:钢卷(或板)剪切、成形、焊接、探伤、校直、切断、包装等,如图1所示.成形工艺的不同,焊接工艺也不同.高频焊接适用于直缝焊管,尺寸精度好、价格低、生产效率高,优良的综合机械性能;激光焊管设备昂贵,用于大批量自动化生产,接头性能好.常见威形工艺及焊接工艺见表1.
Color vision is used throughout medicine to interpret the health and status of tissue. Ionizing radiation used in radiation therapy produces broadband white light inside tissue through the Cherenkov effect, and this light is attenuated by tissue features
随着人们对汽车减重、节能、降耗等问题的关注,汽车轻量化成为汽车制造企业重要研究课题.汽车排气用不锈钢管材的弯管和液压成形技术为实现汽车轻量化提供了技术保障.我公司能够针对汽车排气系统各种异形管件难加工问题,进行设计优化加工,制备相应生产模具,为汽车企业生产各类性能优异的零部件.
冲压件缩颈开裂问题,是冲压专业的行业难题,在一定程度上制约冲压生产.管控缩颈开裂是一个系统工程,笔者所在团队通过几年的攻关,在缩颈开裂控制上取得较大突破,并积累了一套行之有效的管控方法.rn缩颈开裂的系统管控,解决了由于成形裕度不足导致的一些可识别的缩颈开裂问题,但对于生产过程中由于模具异常损伤、设备压力异常变化、零件表面油膜异常变化等突发原因导致的偶发缩颈开裂问题,以及一些不易识别的由于成形间隙过小导致的缩颈开裂问题,缺乏有效的识别和监控手段.