论文部分内容阅读
随着石油工业的迅速发展,具有施工速度快,质量好的车厢房式的计量站、接转站越来越多。我们油田的车厢房,从1978年开始生产以来,目前已是第四代的产品了。目前我们生产的彩色塑料复合钢板车厢房,具有结构简单、自重轻、刚性好、隔热保温、防腐等特点。并且制造工艺简单,生产效率高。不用木材、水泥,以塑代木,以塑代钢,在车厢房上得到了广泛的应用。车厢房采用了钢框架(薄钢轻龙骨),内外墙面、隔墙、顶棚板都采用彩色塑料复合钢板,屋面板采用2毫米钢板,保温层采用聚苯乙烯泡沫板。从应用的材料来看,钢、塑占了主要地位。并实现了工厂化流水线预制,生产工序少,速度快,质量好,
With the rapid development of the petroleum industry, there are more and more metering stations and transfer stations with fast construction speed and good quality. Since the start of production in 1978, the production of the compartments in our oil field has been the fourth generation of products. At present, our color plastic composite steel car cabins are characterized by simple structure, light weight, good rigidity, heat insulation, and corrosion protection. And the manufacturing process is simple and the production efficiency is high. Without wood, cement, plastic substitute wood, plastic substitute steel, it has been widely used in the carriage room. A steel frame (thin steel light keel) was used in the carriage room, and colored plastic composite steel plates were used for the inner and outer walls, partition walls, and ceiling panels. The roof plate was made of 2 mm steel plates, and the insulating layer was polystyrene foam boards. From the perspective of the applied materials, steel and plastic accounted for the main position. And achieved factory prefabrication assembly line, less production processes, high speed, good quality,