【摘 要】
：
A kind of complex additive mainly containing Al, Mg, F, and O was prepared. The synthetical performances of the property-modified prebaked anodes containing add
【机 构】
：
School of Metallurgical Science and Engineering
论文部分内容阅读
A kind of complex additive mainly containing Al, Mg, F, and O was prepared. The synthetical performances of the property-modified prebaked anodes containing additives were tested in laboratory. On the basis of ideal testing results obtained, a large number of industrial prebaked property-modified anodes are prepared in a large-scale aluminum company. Further more, they are all used in 160 kA prebaked anode aluminum electrolysis cells. The statistic result show that, compared with common anodes, the property-modified ones enhance current by 11.6 kg per ton aluminum averagely.
其他文献
The foreign experimental and FEM research of steel moment-resisting connection reinforced with steel plates are introduced. The effect of weld on the connection
The dry friction and wear characteristics of three kinds of friction couples under different loads, MoSi2/45 tempered steel, MoSi2/45 quenched steel, and MoSi2/
Nano-SiO2 particles strengthened Ni-based composite coating was designed and prepared on steel substrate. The structures and nanoparticle content of the nano-Si
A 20 vol.% SiCp/Al composite was fabricated by squeeze casting, of which a new process for fabricating the preform was used by blending Al powder and SiC partic
The life cycle index of remanufactured engines was assessed by using the method of life cycle assessment (LCA). A remanufactured engine of a certain domestic br
Under the condition of equal flow, the maximum and minimum theoretical values of gap size were studied and an estimation equation was established for the clad e
The deformation behavior and the contact area of conductive particles in anisotropically conductive adhesives (ACA) were investigated by finite element method (
The fuzzy C-means clustering algorithm(FCM) to the fuzzy kernel C-means clustering algorithm(FKCM) to effectively perform cluster analysis on the diversiform st
A parametric model of cutting temperature generated in end milling process is developed according to the thermal mechanism of end milling as an intermittent ope
New method for handling roof of the base successive mining is proposed, which is induction caving in the roof. The key is that it is made certain to the station