【摘 要】
：
Overcasting is a new kind of dissimilar joining technique used to produce the aluminum(solid)/magnesium(liquid) bonding bi-metallic material in this study. For the Al/Mg (A390/AM60) bi-metallic samples, the interface microstructures are the research point
【机 构】
：
School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
Overcasting is a new kind of dissimilar joining technique used to produce the aluminum(solid)/magnesium(liquid) bonding bi-metallic material in this study. For the Al/Mg (A390/AM60) bi-metallic samples, the interface microstructures are the research points, which directly inlfuence the mechanical properties. It is, therefore, of vital importance to ifnd a method to improve the interface microstructures. This research focused on the effect of the calcium (Ca) addition in the liquid Mg alloys and the heat treatment on the A390/AM60 interface microstructures of the bi-metallic samples. The testing results showed that, with Ca addition in AM60, owing to two possible reasons, the interface microstructure and the shear strength of the A390/AM60 bi-metallic samples could be improved. The heat treatment could further improve the interface microstructure and the mechanical properties by dissolvingβ-Mg17Al12 into α-Mg and destroying the Mg2Si layer structure.
其他文献
A new type of adjustable nozzle with an annulus clearance between the surfaces of a revolved solid and the matched hole was analyzed, which contained matching parts, regulating parts, guiding elements, and sealing part. The general regulating function of
Multi-walled carbon nanotubes (MWCNTs) reinforced hollow glass microspheres (HGMs)/epoxy syntactic foam was fabricated.The effects of ultrasonication on the density,compression strength,and water absorption properties were studied.Better dispersed MWCNTs
Layered cathode materials of high-temperature lithium batteries, LiNi1/3Mn1/3Co1/3O2 are synthesized by a sol-gel method with variation in final sintering temperature for borehole applications. The structure, morphology and high-temperature discharge perf
ZnO-B2O3-SiO2-Al2O3-Na2O glass doped with nucleating agent TiO2 was prepared with melting-quenching method and the effect of nucleating agent on the crystallization behavior and phase evolution of this glass was investigated by differential thermal analys
A modulated photoluminescence nanosensor was developed for the quantitative detection of formaldehyde with nitrogen-doped graphene quantum dots and melamine. The sensing system was based on the different activated effects of melamine and hydrogen peroxide
Layered double hydroxides (LDHs)/styrene-butadiene-styrene (SBS) copolymer modified bitumen was prepared by melt blending. The effect of LDHs on the ultraviolet (UV) aging behavior of SBS modifi ed bitumen was investigated. The changes of chemical structu