论文部分内容阅读
1.推土作业应在比较疏松的土壤上进行.在硬土作业,最好用松土机先松土.要根据土质情况,选择适当的速度,防止超负荷作业.运土时,将分配器手柄放在“浮动”位置,使铲刀升降自如.2.铲刀切入生土后,如发觉拖拉机超负荷,应立即停止,减速或减少吃土量.根据发动机的声音,随时调整吃土量的多少,防止发动机冒黑烟进行作业,遇有大石块或树根时,先用人工清除,切不可用拖拉机冲击.3.拖拉机不能在危险的地方作业,不可强行通过深水沟、坎埂,以免陷车,作业的地方坡度不要大于20°.4.在铲土和运土的过程中,拖拉机不要转弯.否则,容易使转向离合器及其它零件损坏.尽量不要使油缸内的活塞上升或下降到极限位置.
1. Bulldozing operations should be carried out in the loose soil in hard work, it is best to use loose soil first loose soil. According to soil conditions, select the appropriate speed to prevent overload operation. Handle on the “floating” position, so that the blade lift freely .2. After the blade into the earth, if found tractor overload, should immediately stop, slow down or reduce the amount of soil .According to the engine sound, adjust the soil at any time The amount of how much, to prevent the engine black smoke operations, in case of boulders or roots, the first manual removal, must not be tractor impact .3 tractor can not work in dangerous places, can not be forced through the deep ditch, ridge埂, so as to avoid trapping, work place slope not more than 20 ° .4 in the soil and soil transport process, the tractor Do not turn otherwise easy to make the steering clutch and other parts damaged try not to make the cylinder piston Or down to the limit position.