论文部分内容阅读
在框架结构支设地下室剪力墙模板时,在竹(木)胶合板上钻直径12mm孔,穿对拉螺栓对剪力墙模板进行加固,在剪力墙施工完成之后进行上部框架柱、梁、板施工。梁、柱模板均为配好的模板,许多在地下室剪力墙用过带孔的竹(木)胶合板模板要用到平板支模上,这些用过的模板上有许多非常规矩的孔眼,修补起来较为麻烦,并且费工费时,而且修补后外观也不是很理想。在施工实践中,总结出使用带有边沿的
When supporting the basement shear wall formwork in the framework structure, drill a hole with a diameter of 12 mm on a bamboo (wood) plywood and reinforce the shear wall formwork with a pair of pull bolts. After the construction of the shear wall is completed, the upper frame columns, beams, Board construction. Beam and column templates are well-matched templates. Many of the perforated bamboo (plywood) plywood formwork used in the basement shear walls are required for flat formwork. These used formwork has many irregularly-shaped holes that are repaired Troublesome and time-consuming, and the appearance after repair is not very satisfactory. In the construction practice, it is concluded that the use of the edge