论文部分内容阅读
根据标准规范要求,石油储备库储罐应选择钢制浮顶罐,浮盘形式应根据地区的气象条件等选择单盘式或双盘式,但是目前储罐浮盘的形式往往是由设计习惯确定,通过对单盘式与双盘式浮顶储罐的比较,对浮盘形式选择给出建议;为保障储罐安全,提高储罐使用容积,建议对储罐设置高高、低低液位,并且相应于储罐进罐阀门,外输泵联锁,并给出计算实例。
According to the standard requirements, the oil storage tank should be selected steel floating roof tank, the form of the floating disk should be selected according to the meteorological conditions of the region, such as single-disk or double-disk, but the current form of the storage tank is often a design habit Determine, through the comparison of single disk and double disk floating roof storage tank, give suggestions on the selection of floating disk form. To ensure the safety of storage tank and increase the volume of storage tank, it is suggested to set the height, Bit, and corresponding to the tank into the tank valve, pump output interlock, and gives a calculation example.