【摘 要】
：
The viscoplasticity and compressive strength of cement with high erosion performance were studied. The influences of curing temperature and content of ground granulated blast furnace slag (GGBFS) on these performances of the medium heat cement (including
【机 构】
：
College of Civil and Architectural Engineering, Guilin University of Technology, Guilin 541004, Chin
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
The viscoplasticity and compressive strength of cement with high erosion performance were studied. The influences of curing temperature and content of ground granulated blast furnace slag (GGBFS) on these performances of the medium heat cement (including high iron and low calcium phase) were also investigated. The results indicate that the medium heat cement with high iron phase can maintain better fluidity and low temperature sensitivity than that of ordinary Portland cement at high temperature. GGBFS can play an important role in improving the fluidity and stability of the slurry, and avoid the cement setting and hardening prematurely at high temperatures. The microstructure analysis shows that a large amount of CH with layer shape appear in the slurry. The amount of this gel layer in the slurry increased as the curing temperature elevated. The layer can make the cement stone structure more denser, so that the compressive strength of samples are enhanced in the later stage. When the medium heat cement contains 40％ GGBFS, the system has the best flow performance and stability under high temperature environment, and can be applied to mass concrete with excessive internal temperature.
其他文献
The microstructure and performance of Li4Ti5O12 doped by Mg prepared by hydrothermal method and solid phase method were investigated. Lithium dihydrate, magnesium acetate and tetrabutyl titanate were used as the main raw materials. This study reveals that
In order to study the effect of electromagnetic compound treatment on the mechanical property, cutting performance and microstructure of cemented carbide, the samples were treated by a self-made electromagnetic compound treatment device with different mag
Based on an advanced technology, randomly-aligned subwavelength structures (SWSs) were obtained by a metal-nanodot-induced one-step self-masking reactive-ion-etching process on a fused silica surface. Metal-fluoride (mainly ferrous-fluoride) nanodots indu
To explore the complex thermal-mechanical-chemical behavior in the solid-liquid cast-roll bonding (SLCRB) of Cu/Al cladding strip,numerical simulations were conducted from both macro and micro scales.In macro-scale,with birth and death element method,a th
An electro-deposition method has been recently proposed to repair cracked reinforced concrete. To evaluate the corrosion resistance of the reinforcing steel in cracked concrete, three different parameters including type of auxiliary electrode, electrode d
Cement pastes containing 0％, 15％, 25％ and 35％ fly ash were prepared. After being cured for 90 days, all fly ash blended cement pastes were crushed and ground into powders with a particle size less than 80 μm and then the powders were immersed in alkali so
V-Cr-Al-O nanospheres were successfully synthesized using V2O5, Al(OH)3, CrO3, and H2C2O4·H2O as the starting materials by a facile one-pot hydrothermal approach. Several techniques containing X-ray powder diffraction, hydrogen temperature programmed redu
Eu3+ ion doped cubic Na5Lu9F32 single crystals with high quality were synthesized by a modified Bridgman method by using a high 70-90 ℃/cm temperature gradient for cross solid-liquid interface.The optical spectroscopic investigations of the obtained singl
Five kinds of mortars with density grades of 500, 600, 700, 800, and 900 kg/m3 were prepared. Their thermal conductivity and compressive strength were measured, and the morphological changes before and after simulated tunnel fire were observed. To investi
Influence mechanism of sulfide ions (S2-) during manganese electrodeposition from sulphate electrolyte was investigated. Under the experimental conditions, S2- ion concentration and electrolyte pH represented significant multiple effects on the cathode cu