光和Dressed原子的相互作用

来源 :光学学报 | 被引量 : 0次 | 上传用户:liang_yanzhi
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
考虑在共振强驱动场作用下二能级原子所构成的Dressed原子和探测光的相互作用。把无限多个互相耦合的一阶微分方程(主方程)简化为四个独立的方程,从而得到Dressed原子与探测光相互作用的Bloch方程,可以把普通原子与光相干相互作用的全部过程推广到Dressed原子。求解了Dressed原子对两个频率探测光的极化率,研究了Dressed原子中的位相共扼波的产生和特性。
其他文献
基于部分相干理论中交叉谱密度函数的概念研究了平面周期物体的Lan效应文章导出了平面物体Lau像光强分布式,求得了平面周期物体的Lau像光强分布及其Lau成像条件,并进行了实验验证,给出了实验结果.
An experimental and simulation study of warm dense carbon foams at ambient density (ne ~ 1021 cm-3) is presented. This study of isochorically heated foams is motivated by their potential application in carbon
期刊
期刊
We report a 307 W 1018 nm Yb-doped fiber laser pumped by a single 976 nm laser diode. The cavity slope efficiency is up to 75.9% and the amplified spontaneous emission is suppressed by 54 dB. The beam quality of the output laser has an
Objective image quality measure, which is a fundamental and challenging job in image processing, evaluates the image quality consistently with human perception automatically. On the assumption that any image distortion could be modeled as the difference b
Optical detectors with single-photon sensitivity and large dynamic range would facilitate a variety of applications. Specifically, the capability of extending operation wavelengths into the mid-infrared region is highly attractive. Here we implement a mid
期刊
A method to fabricate fiber Bragg grating (FBG) in an optical microfiber (OM) from a conventional photosensitive fiber is proposed in this letter. The cladding of a conventional photosensitive fiber is etched to 17 \mu m. The etched fiber is drawn to an
Surface-plasmon (SP) enhancement of amorphous-silicon-nitride (a-SiNx) light emission with single-layer gold (Au) waveguides is experimentally demonstrated through time-resolved photoluminescence measurement. The a-SiNx active layer with strong steady-sta
期刊
A Mach-Zehnder interferometer (MZI) based on two spherical structures is proposed and temperature and humidity are measured simultaneously. The device is fabricated by inserting two spherical structures into a single mode optical fiber (SMF). The results
期刊