在圆柱体外圆表面打印标记,许多厂家都采用滚字模,下面介绍几种简单方法。 (1)在刨床上打印标记。工作原理如图1所示,滚轮4两端用深沟球轴承通过支座支承。刨床滑枕运动时,刀杆1同时运动,字头2通过摩擦力带动工件旋转,完成打印标记工作。该方法工件装 Printed on the cylindrical surface of the mark, many manufacturers are using rolling type, the following describes several simple methods. (1) Print a mark on the planer. Working principle shown in Figure 1, roller 4 at both ends with deep groove ball bearings through the bearing support. Planer ram movement, the knife 1 at the same time movement, the first two friction driven by the rotation of the workpiece to complete the print mark. The method of workpiece loading