【摘 要】
：
A comprehensive investigation was performed for repairing the different types of cracks appearing on the surface or inside the concrete lining at vadous depths. The mate-rial properties used in grouting and two methods for crack repair were discussed in d
【机 构】
：
School of Water Resources and Hydropower, Wuhan University, Wuhan 430072, China;College of Civil and
论文部分内容阅读
A comprehensive investigation was performed for repairing the different types of cracks appearing on the surface or inside the concrete lining at vadous depths. The mate-rial properties used in grouting and two methods for crack repair were discussed in details,and consequently reliable repair measures were proposed and implemented. It is a better choice to adopt the hole-drilling method for the relatively regular crack. The grouting pres-sure should not be too high and it is generally between 0.4～0.6 MPa. For the second time grouting, the pressure maybe increased to 0.8 MPa. Other method is the pasting nozzles method which is more suitable for irregular cracks such as cracks with intensive density and crossing cracks. Its grouting pressure is generally between 0.6～1.0 MPa. The in-situ tests in Three Gorges Project demonstrate favorably the feasibility and applicability of the proposed methods for crack repair within the lining concrete.
其他文献
Taking the Xinhe mine\'s structure, mine pressure, structural fissure, fault and fault displacement, the distance between fault and water inrush point, thickness of block,water pressure those geological factors which influenced the water inrush as the i
Based on the movement regularity of surrounding rock with road-in packing of gob-side entry retaining in fully-mechanized sub-level caving face (RPGERFCF), the me-chanical model of its surrounding rock was established and the calculating formulas of the d
Focused upon the dynamic changing regularity and tendency of overburden movement and bed separation developing during the strip mining and stoping under rail-ways were simulated by ANSYS model. The results show that movement and rheology developing of key
As a good method to solve the problem of high methane on the workface and in the goaf, drawing coal strata methane through a surface borehole is used. However, the excavation affected the overlying rock strata greatly. When the excavation face passed thro
In order to improve the thermal environment of high-temperature heading face,moisture content of supply air is reduced by dehumidification, and the relative humidity of environment air of the heading face is also decreased. First, according to the coeffic
Through discussion of the time-distance curve characteristics of the direct wave and from the front, side and rear of the reflection waves of the seismic reflection method for advanced exploration in mines, and analysis of several major interference waves
Analyzed the situations and characteristics of thin coal seam mining and its mining technologies, and introduced the mining innovation technology used by Tianchen Coal Mine of Zhaozhuang Coal Company of China. This innovation technology combined the fully
CSIRO has recently developed a real-time roof monitoring system for under-ground coal mines and successfully tried the system in gate roads at Ulan Mine. The sys-tem integrated displacement monitoring, stress monitoring and seismic monitoring in one packa
The review and numerical analysis had been conducted further understand the deformation and failure beahviour of roadway junctions, associated with the different geometrical characteristics, various depth of cover, different mechanical properties around t
The axial, lateral and circumferential strains were analyzed for a rock specimen subjected to shear failure in the form of a shear band bisecting the specimen in triaxial compression. Plastic deformation of the specimen stemmed from shear strain localizat