【摘 要】
：
We report the “periodic” soliton explosions induced by intracavity soliton collisions in a dual-wavelength mode-locked Yb-doped fiber laser. Owing to the different group velocities of the two wavelengths, the mode-locked solitons centered at different wav
【机 构】
：
GuangzhouKeyLaboratoryforSpecialFiberPhotonicDevicesandApplications
【出 处】
：
PhotonicsResearch
论文部分内容阅读
We report the “periodic” soliton explosions induced by intracavity soliton collisions in a dual-wavelength mode-locked Yb-doped fiber laser. Owing to the different group velocities of the two wavelengths, the mode-locked solitons centered at different wavelengths would periodically collide with each other. By using the dispersive Fourier transformation technique, it was found that each collision would induce soliton explosions, but none of them would be identical. Therefore, this phenomenon was termed as “periodic” soliton explosions. In addition, the dissipative rogue waves were detected in the dual-wavelength mode-locked state. The experimental results would be fruitful to the communities interested in soliton dynamics and dual-comb lasers.
其他文献
In this Letter, a single scattering turbulence model in a narrow beam case for ultraviolet (UV) communication is proposed based on the division of the effective scattering volume. This model takes the variation of atmospheric scattering, absorption, and t
An approach to measure a high-dynamic two-dimensional (2D) temperature field using a high-speed quadriwave lat-eral shearing interferometer (QWLSI) is proposed. The detailed theoretical derivation to express the wavefront recon-struct principle of the pro
为了保证非接触式掌纹识别系统所采集的掌纹图像清晰度能够满足识别要求,缩短用户的测试时间,建立了图像清晰度与掌纹错误识别率的关系模型,并实现改进的非接触式在线掌纹识别模拟系统。引入图像清晰度评价函数,建立图像清晰度函数与物距(手与镜头的距离)之间的关系模型;进一步建立图像清晰度与该清晰度下掌纹识别系统错误识别率的关系模型;实现改进的基于清晰度评价模块的非接触式掌纹识别模拟系统。实验结果表明,改进的模
以卫星立体影像数据和倾斜摄影数据为数据源,以资源三号卫星获取的湖南省遥感影像为例,基于瓦片金字塔模型,实现了不同分辨率的多类型数据的融合,建立了地形与纹理一体化表达的真三维模型。自主研发了ItelliEarth软件,以实现基于海量地形数据的三维场景下数据模型的可视化。研究结果表明,所提方法建立的真三维模型符合相关规范要求,为实现大尺度空间真三维模型的构建提供了有效途径。
本文叙述了单模光纤等效阶跃折射率(ESI)参数测量的一种简便方法及其原理.ESI参数是通过测量某一波长下的模斑和截止波长或二个波长下的模斑得到的.文中给出了实验测量的典型结果.
光学衍射方法可以确定固体样品的晶体取向。本方法用于晶体需要精确调准的应用，如太阳电池半导体晶片和晶体振荡器的制造等。也适于表征太阳电池制造中用的小颗粒尺寸多晶硅衬底的特性。
加州欧文市贝克曼激光研究所和医疗所的研究人员在一次激光微外科和生物学技术能力的图解演示中，用倍频脉冲Nd:YAG激光在红血球细胞上打孔。激光脉宽10 ns，能量为毫焦耳级，重复频率5 Hz。
We demonstrate a laser-diode (LD) pumped actively Q-switched laser with Nd:Sc0.2Y0.8SiO5(Nd:SYSO) crystal for the first time. A stable actively Q-switched laser is obtained at dual wavelengths of 1 075.2 nm and 1 078.2 nm.
Based on the inverse Faraday effect, a super-long longitudinal magnetization needle can be induced by a transversely polarized needle-shaped electric field. This needle-shaped electric field can be obtained in the focal volume of the objective by focusing
报道了一种基于色散补偿光纤内的马赫-曾德干涉效应的掺铒光纤环形激光器，得到了稳定的多波长激光输出。这种干涉效应有效地抑制了由均匀谱线展宽效应引起的不稳定的模式竞争，从而在室温下能够得到稳定的多波长激光输出。双波长激光输出比较稳定，峰值波动约小于1.1 dB，而三波长激光输出的峰值波动约为4 dB。