【摘 要】
：
Effects of cold rolling on the microstructure and mechanical properties of Fe-Ni-Mn-Mo-Ti-Cr maraging steels were studied.To investigate the microstructure and
【机 构】
：
Young Researchers Club,Faculty of Materials Engineering,Department of Materials Science and Engineer
论文部分内容阅读
Effects of cold rolling on the microstructure and mechanical properties of Fe-Ni-Mn-Mo-Ti-Cr maraging steels were studied.To investigate the microstructure and mechanical properties,optical microscopy,scanning electron microscopy,X-ray diffraction,tensile test,and hardness test were used.The results show that the solution-annealing treatment in the cold-rolled steel redounds to the formation of submicrocrystalline Fe2(Mo,Ti)Laves phase particles,which are stable at high temperatures.These secondary Laves phase particles prevent from recrystallization at high temperatures and correspond to semi-brittle fiacture in the subsequent aging treatment.
其他文献
In this article, we report the results of our detailed investigations of the growth kinetics of zero-dimensional nanocrystals as well as one-dimensional nanorod
Al-Ti-C-Y master alloy was prepared by combining SHS technique and melting-casting method. The microstructure of master alloy and its grain-refining effect on A
The substrate pre-treatment plays a key role in obtaining hollow-cored carbon nanotubes (CNTs) and solidcored carbon nanofibers (CNFs) from flames. This paper i
Single fiber pull-out testing was conducted to study the origin of the functional responses to loading of carbon fiber reinforced cement-based composites.The va
Nd12.3Fe81.7-xGaxB6.0 (x =0-1.8) ribbons were prepared by melt spinning at 22 m/s and subsequent annealing treatment.The influences of Ga addition and annealing
The minerals of chevkinite group were commonly considered to be anhydrous minerals. The infrared absorption spectrum of natural nonmetamict chevkinite-(Ce) from
The interfacial thermal conductance (ITC) and thermal conductivity (TC) of diamond/Al composites with various coatings were theoretically studied and discussed.
In the non-linear microwave drying process,the incremental improved back-propagation (BP) neural network and response surface methodology (RSM) were used to bui