【摘 要】
：
为了简化传统超导电机的低温冷却系统,提出一种新型轴-径向磁通全超导同步电动机,分析该电机的结构特点和工作原理.利用三维有限元法计算了电机的空载磁场分布,对不同轴向超
【机 构】
：
哈尔滨理工大学电气与电子工程学院,哈尔滨工业大学电气工程系
论文部分内容阅读
为了简化传统超导电机的低温冷却系统,提出一种新型轴-径向磁通全超导同步电动机,分析该电机的结构特点和工作原理.利用三维有限元法计算了电机的空载磁场分布,对不同轴向超导励磁绕组下的磁场以及轴向磁路对径向磁路的影响进行分析,分析结果通过空载反电动势实验得到了验证.在样机结构基础上,提出一种新型转子结构方案,分析了2种转子结构下的气隙磁场,并对气隙磁密的谐波含量进行了比较,得出一些有益的结论,为该新型大容量电动机的优化设计和性能分析提供参考.
其他文献
The deformation-induced textures in electrodeposited nickel coating were numerically studied. The finite element method (FEM) for polycrystalline was developed
A pure aluminum matrix composite reinforced by Bi2O3-coated aluminum borate whisker was fabricated by a squeeze casting method. The mass ratio of Bi2O3 to whisk
A novel method to measure the temperature on the surface of micro-hotplate was presented. The tiny fiber probe and the optical power meter were employed to meas
A precondition for correctly analyzing the stability of a slope and designing its bracing structure is to study and determine the influence of excavation blasti
The influence of the additions of Mg-Zn-Y quasicrystals-containing master alloy on the microstructures and mechanical properties of AZ91 alloy under conventiona
Extrusion treatment is a common method to refine the grain size and improve the mechanical properties of metal material. The influence of hot extrusion on micro
To understand the flow trace of semi-solid slurry in mold cavity, some thermocouples were inserted in mold cavity, and the reaction timing of thermocouples show
Two different titanium alloying methods were applied to ZL108 alloy for preparing specimens containing titanium. The specimens were tested on the MTS 810 materi
为了解决车辆检测过程中的阴影干扰问题,以点对属性为基础,利用HSL色彩空间中前景、背景和运动阴影之间的色度、亮度属性,在给定的背景图像集中,采用离线训练的方法,于图像的全局域中建立稳定的不随环境变化的多点对参考模型.该模型充分考虑了图像全局域的颜色信息,减小了背景像素的误差,能在线消除运动阴影对车辆分割的影响,且对于复杂环境下的运动背景和光照变化具有较强的抑制作用.为减小算法的计算量,引入背景模板