普通带式输送机,通常使用的是二螺栓滚动轴承座,一般都是上、下端盖的分体式结构,应用在皮带机上又是垂直装置的多。皮带机在输煤运行中,由于振动易使上、下端盖固定螺丝松动,且轴承上、下端盖封闭不良,灰尘易侵入轴承室,使轴承室内润滑油逐渐变质,导致润滑不良,致使轴承座磨损加快,严重时不能维持皮带机的正常运行,必须停机检修,更换轴承座。根据这一情况,我们在轴承座结构上动脑筋,自行设计了轴承座,将上下端盖分体式轴承座改为整体式结构,即将轴承座设计成上下一体,轴承从侧面装进去,填满 Ordinary belt conveyor, usually using the two bolt rolling bearing seat, are generally the upper and lower cover of the split structure, used in the belt conveyor is more vertical devices. Belt conveyor in the coal operation, due to vibration easy to make the upper and lower cover captive screws loose, and bearing the upper and lower end cap closed bad, easy to invade the dust in the bearing room, the bearing room of the gradual deterioration of oil, resulting in poor lubrication, resulting in bearing Faster wear and tear, serious can not maintain the normal operation of the belt machine, you must shut down for maintenance, replace the bearing. According to this situation, we have the brains in the structure of the bearing seat, self-designed bearing seat, split the upper and lower end cover split bearing block to the overall structure, the bearing block is designed to be one up and down, the bearings loaded from the side to fill