Application of Grain Boundary Engineering to Improve Intergranular Corrosion Resistance in a Fe-Cr-M

来源 :金属学报(英文版) | 被引量 : 0次 | 上传用户:pfeiyuan2009
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Optimization of grain boundary engineering (GBE) process is explored in a Fe-20Cr-19Mn-2Mo-0.82 N high-nitrogen and nickel-free austenitic stainless steel,and its intergranular corrosion (IGC) property after GBE treatment is experimentally evaluated.The proportion of low Σ coincidence site lattice (CSL) boundaries reaches 79.4% in the sample processed with 5% cold rolling and annealing at 1423 K for 72 h;there is an increase of 32.1% compared with the solution-treated sample.After grain boundary character distribution optimization,IGC performance is noticeably improved.Only Σ3 boundaries in the special boundaries are resistant to IGC under the experimental condition.The size of grain cluster enlarges with increasing fraction of low ΣCSL boundaries,and the amount of Σ3 boundaries interrupting the random boundary network increases during growth of the clusters,which is the essential reason for the improvement of IGC resistance.
其他文献
A 444-type heat-resistant ferritic stainless steel containing 0.05 wt% Ce (rare earth element) and 2 wt% (Mo + W) was adopted as an experimental material to study the effect of finish rolling temperature on microstructure and texture evolution as well as
The kinetics of isothermal austenite (γ)-to-ferrite (α) transformation at various temperatures in Fe-2Mn and Fe-2Mn-0.5Mo (wt%) alloys is investigated via dilatometry experiments and phase-field modeling.It was interestingly found that Mo addition has a m
In order to improve the interface wettability as well as the interfacial bonding between graphene and copper matrix,in this work,graphene nanoplates modified with nickel nanoparticles (Ni-GNPs) were synthesized using a one-step method based on spray-dryin
Construction of suitable structural models in order to account for chemical short-range orders is the reason behind the difficult multi-scale computational simulation methods for solid solutions.Herein,using Ti-Mo alloys as representative,we used our clus
FeAlCuCrNiMo0.6Tix (x =0.2,0.6,0.8) high-entropy alloys were fabricated with flux-cored wire and surfaced on low-carbon steel by gas metal arc welding.The effect of Ti addition on the microstructures and properties of FeAlCuCrNiMo0.6Tix HEAs surfacing lay
Ti-Ta alloys have been widely studied for biomedical applications due to their high biocompatibility and corrosion resistance.In this work,nearly fully dense and in situ alloyed Ti-50 wt% Ta samples were fabricated by the laser powder bed fusion (LPBF) of
The effect of stacking fault energy (SFE) on the grain structure evolution of face-centered cubic metals during friction stir welding was investigated by using pure aluminum,pure copper and Cu-30Zn alloy as experiment materials.Tool “stop action” and rapi
The NiTi cladding with/without Ni interlayer was prepared on stainless steel (SS) by tungsten inert gas (TIG) surfacing process,aiming at achieving good cavitation erosion resistance.The ranking according to the cavitation erosion resistance is NiTi plate
A systematic study on the wettability and interactions between superalloy melts with various Re contents and Al2O3-based ceramic moulds was presented in this paper.It was found that the increase of Re content inhibited the interfacial reactions to some ex
The microstructure and fracture toughness of weld metal under Ti-free and Ti-containing different fluxes were investigated in this study.It was found that the trace element Ti of flux in submerged arc welding produced significant influence on the fracture