Tribocorrosion Behavior of 304 Stainless Steel in 0.5 mol/L Sulfuric Acid

来源 :金属学报(英文版) | 被引量 : 0次 | 上传用户:pastleaves
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The tribocorrosion behavior of 304 stainless steel was studied through comparing the damage behavior of 304 stainless steel in dilute sulfuric acid to that in distilled water by a reciprocating tribotester.The re-passivation behavior,the surface and sectional morphological features,as well as the change of microhardness of samples were studied,and the tribocorrosion mechanism was also discussed.The experimental results reveal that the damage of stainless steel in dilute sulfuric acid was caused by the steel\'s mechanical removal and electrochemical dissolution.The wear mechanism of stainless steel is abrasive wear,which mainly consists of micro-cutting and peeling.The synergetic action between corrosion and wear is notable.The corrosive environment leads to the embrittlement of the surface layer,and the wear destroys the passivation film and causes galvanic corrosion.
其他文献
Perovskite BaTiO3 (BTO) nanocrystals with a size of 150-200 nm have successfully been synthesized via a facile hydrothermal method by employing titanate nanowires as synthetic precursor.Tetragonality and spontaneous ferroelectric polarization of BTO nanoc
The σ-phase precipitation in 20% cold-worked 15Cr-15Ni titanium-modified austenitic stainless steel was studied during long-term aging treatment.During the isothermal aging stage,the amount of σ-phase was significantly increased at beginning and gradually
It has been widely demonstrated that addition of Ni in low-carbon steels can effectively improve the cryogenic toughness,but the mechanism behind it has yet to be clarified.In the present work,the evolutions of microstructure and mechanical properties aft
2.98 kGy/h (1007 h) gamma irradiation and 90 ℃ (2000 h) thermal aging were exerted to X65 grade low carbon steel buried in Gaomiaozi bentonite containing 17 wt% Beishan groundwater.The average corrosion rate of X65 low carbon steel was measured.The elemen
The effect of electropulsing on the mechanical behaviors and microstructures of Ti-6Al-4V titanium alloy was investigated by an uniaxial tensile test.Compared to the value measured in cold tensile test,the alloy exhibits lower ultimate tensile strength wh
Despite the economy of material cost and excellent toughness of Cu-based amorphous alloys,especially Cu5oZr5o,their poor corrosion resistance to a chloride medium limits their widespread applications.In this study,corrosion tests were performed on the Cu5
The hot deformation characteristics and the corrosion behavior of a high-strength low-alloy (HSLA) steel were investigated at deformation temperatures ranging from 800 to 1100 ℃ and strain rates ranging from 0.1 to 10 s-1 using an MMS-200 thermal simulati
The tensile tests of AZ31 magnesium alloy were carried out under room temperature,100,150 and 200 ℃ with and without pulse current.The effect of temperature on dynamic recrystallization (DRX) of AZ31 alloy was studied at different conditions.One-parameter
The voltage was recorded to investigate the influence of the static magnetic field on droplet evolution during the magnetically controlled electroslag remelting (MC-ESR) process.MC-ESR experiments were carried out under different remelting current,and tra
In this study,the degradation efficiencies of zero-valent iron (ZVI) powders with different structures and components were evaluated for methyl orange (MO).The results show that the structure is an essential factor that affects degradation,and added non-m