论文部分内容阅读
Effect of Trace La Addition on the Microstructure and Mechanical Property of As-cast ADC12 Al-Alloy
【机 构】
：
School of Mechanical-Electrical Engineering, Nanchang University, Nanchang 330031, China
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
【发表日期】
：
2013年1期
其他文献
Application of Piezoelectric Materials in a Novel Linear Ultrasonic Motor based on Shear-induced Vib
A novel linear ultrasonic motor based on d15 effect of piezoelectric materials was presented. The design idea aimed at the direct utilization of the shear-induced vibration modes of piezoelectric material. Firstly, the inherent electromechanical coupling
Microstructure and Mechanical Properties of AerMet 100 Ultra-high Strength Steel Joints by Laser Wel
AerMet100 ultra-high strength steel plates with a thickness of 2 mm were welded using a CO2 laser welding system. The inlfuences of the welding process parameters on the morphology and microstructure of the welding joints were investigated, and the mechan
Tributyl citrate (TBC) plasticizer has been selected to prepare the novel plasticized PC under different time and temperature. The TBC plasticization effect on PC Tg, mechanical properties and morphology has been investigated by DMTA, DSC, tensile test an
In order to improve the comprehensive utilization of solid waste such as iron tailings and waste glass and so on, mechanical property test of cement tailings mortar mixed waste glass and curing mechanism research were conducted in the key materials mechan
Low alkaline liquid state setting accelerator(LSA) for Portland cement was prepared in laboratory from aqueous solution of several inorganic sulfate salts and some organic chemical substances. Properties of cement with addition of LSA relating to its sett
Cadmium sulphoselenide was synthesized continuous substitution solid solution and the only known pigment to yield bright red color on ceramic decoration. Encapsulated cadmium sulphoselenide pigments could yield abundant hues from yellow to red with high o
Thermal Expansion and Mechanical Properties of Middle Reinforcement Content SiCp/Al Composites Fabri
Middle reinforcement content SiCp/Al composites (Vp=30%, 35% and 40%) for precision optical systems applications were fabricated by powder metallurgy technology. The composites were free of porosity and SiC particles distributed uniformly in the composite