工业骨胶脱色工艺条件的研究

来源 :现代化工 | 被引量 : 0次 | 上传用户:xiaoqingwa123456789
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
氧化法与物理吸附法相结合,以骨胶为原料,过硫酸钠和酸化凹凸棒土为脱色剂,得到浅色的骨胶胶黏剂。研究了m(水)∶m(干骨胶)为1.3∶1时,过硫酸钠质量、酸化凹凸棒土质量、反应温度和反应时间对骨胶色泽的影响,并在单因素实验的基础上,通过正交试验得出骨胶脱色的最佳工艺条件为:过硫酸钠质量分数为9.3%,酸化凹凸棒土质量分数为8.0%,反应温度为50℃,反应时间为60 min,经最佳工艺制备的骨胶胶黏剂脱色率为71.13%,稳定性良好,同时骨胶的性能未发生改变。 Oxidation and physical adsorption combined with bone glue as raw materials, sodium persulfate and acidified attapulgite as a decolorizing agent, to be light-colored adhesive. The effects of the mass of sodium persulfate, the mass of acidified attapulgite, the reaction temperature and the reaction time on the color of the bone glue were investigated. The results showed that when m (water): m (dry bone glue) was 1.3:1, Orthogonal test results showed that the optimum conditions for the decoloration of bone glue were as follows: the mass fraction of sodium persulfate was 9.3%, the content of acidified attapulgite was 8.0%, the reaction temperature was 50 ℃ and the reaction time was 60 min. The decoloration rate of gelatin adhesive was 71.13%, the stability was good, and the properties of gelatin did not change.
其他文献
“单兵维护与修理支持系统(MARSS)”是为了获取更好的武器系统维修能力,而将操作者与仪器设备综合为一体的单兵维修系统。它以质量轻且可穿戴的个人计算机为核心,采用开放式的系统结构
采用水热法分别在酸性和碱性条件下合成了α-MnO_2和δ-MnO_2催化剂,利用XRD、N2-BET、Raman、H2-TPR对合成样品进行表征。将合成的α-MnO_2和δ-MnO_2催化剂用于催化废水中
不要以为一谈和谐就是赶时尚,实际上广电的发展套上和谐二字是最合适不过了.
期刊
期刊
利用Bi4Ti3O12和TiO2的结构相似性,以TiO2纳米片为原料,用水热法制备了Bi4Ti3O12/TiO2异质结,并通过X射线衍射、扫描电子显微镜和高分辨透射电镜等证实了异质结结构的形成。
期刊
讨论“海响尾蛇”导弹在临近遭遇点时采用相对比例导航制导律对付机动目标的能力问题 Discuss the ability of the “Sea Tail-Rescue” missile to deal with maneuvering
以5,5-二甲基海因(DMH)、1,4-二溴丁烷为原料,合成了3-溴丁基-5,5-二甲基海因(BBDMH),并以柱色谱法分离提纯,薄层色谱法跟踪产物。利用傅里叶红外光谱(FTIR)、核磁共振氢谱(1