南湾水电站每台水轮机的出力为1800马力;转速为300转/分;设计水头为20米;流量为8.44立米/秒;水涡轮的型号为K-3型,其直径D=1260毫米。经过运行的结果证明,水轮机的制造质量是优良的,但由于制造厂初次生产这种机器,经验不足,也发现了一些缺陷。现将这些缺陷的处理情况总结如下,供各有关单位参考。 The output of each turbine of the Nanwan Hydropower Station is 1,800 hp; the speed is 300 rpm; the design head is 20 m; the flow rate is 8.44 m / s; the water turbine model K-3 has a diameter of D = 1260 mm. The result of the operation proved that the manufacturing quality of the turbine was excellent, but some shortcomings were also found due to lack of experience in the initial production of such a machine by the manufacturer. The handling of these defects are summarized below, for the relevant units for reference.