Standing wave drift of hemispherical resonator with quality factor non-uniformity under a ring elect

来源 :中国航空学报(英文版) | 被引量 : 0次 | 上传用户:toboho
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Hemispherical Resonator Gyroscope(HRG)is a classical high precision Coriolis Vibration Gyroscope(CVG),which performs attitude estimation of carrier by detecting the precession of standing wave of resonator,thus,the drift of standing wave of resonator has a great influence on the output accuracy of gyroscope,where the quality factor non-uniformity of resonator is one of main error sources.Ring electrode is a classical excitation structure of HRG because the standing wave can precess freely under its excitation,which makes the gyroscope have more accurate scale factor,larger measurement range and better dynamic characteristics.In this paper,the equations of motion of an ideal resonator excited by a ring electrode are derived by the elastic thin shell theory and Lagrange mechanical prin-ciple,then the corresponding equivalent mechanical model is established.According to the“av-erage method”,it can be seen that the ideal resonator excited by the ring electrode works in integral mode,and any position in the circumferential direction of resonator can be a working point,which means that the quality factor non-uniformity has a great effect on the drift of standing wave.Therefore,the equations of motion of resonator with quality factor non-uniformity under the ring electrode excitation are deduced by the equivalent mechanical model,and the drift model of standing wave is established by the“average method”,it can be found that both the amplitude of quality factor non-uniformity and angle between the“inherent damping axis”and antinode axis of standing wave can affect the drift rate of standing wave.Moreover,the drift model indicates that if the input angular rate does not reach the threshold,the precession angular rate of standing wave will appear“self-locking”phenomenon,that is,the gyroscope will lose the integral effect.
其他文献
In high speed milling aeronautical part,tool condition monitoring(TCM)is very impor-tant,because it is prone to get a chatter owing to the low stiffness of thin-walled structures.And the TCM is key technology for automated machining.In this paper,aiming t
This study aims at investigating the impact of using the Magnetorheological Elastomers(MREs)medium to improve the formability of T-shaped Inconel 718 tubes during the bulging pro-cess.Besides,the influence of the punch size and the intensity of the magnet
针对隧道施工监测内容,以三维激光扫描仪获取的点云数据为基础,研究隧道点云中轴线和连续断面的提取、隧道断面拟合、隧道超欠挖判别、监测报表生成等关键算法,以AutoCAD为平台、Excel为数据容器,运用VBA语言进行软件二次开发,形成包括点云数据转换、隧道断面分析和监测数据整理功能的隧道点云数据变形分析系统.使用结果表明系统稳定性良好,点云数据处理效率高.
In this study,a new GVS(Ground Volcanic Scoria)lunar regolith simulant was pro-duced.The similarity between GVS and lunar soil was proved by comparison with Apollo lunar soil samples and other commercial lunar soil simulants.Then,GVS lunar regolith simula
充填土料中粉粒含量对充填管袋的脱水性能影响较大,进而影响到管袋筑坝的施工周期.考虑袋体缝制方式对脱水特性的影响,在研究充填料含粉量对纵向吊袋脱水影响的基础上进行了横向吊袋脱水试验,研究5种不同级配下横向吊袋脱水量随时间的变化规律,并分析充填料含粉量与脱水速率之间的关系以及与纵向吊袋脱水试验结果进行对比分析.研究结果表明:横向吊袋的脱水过程分为稳定阶段和不稳定阶段,其中,稳定阶段为脱水过程的主导阶段,且该阶段内的脱水速率与脱水时间呈线性关系,在不稳定阶段中,脱水速率随时间略有波动,待吊袋内形成稳定的反滤结构
在中国北方寒冷地区,温度低、雨雪量大等特殊环境,导致隧道拱顶出现渗水结冰的现象,在一定程度上破坏结构也影响行车安全.因此,如何针对这类冻害做出防治措施成为行业内重点关心的话题.人工、风力扫冰器以及融冰装置除冰技术等各类方式在很多工程维修养护过程中得到应用,但是基于寒区背景下,除冰技术在一些方案实施阶段中存在差异性.为此,文章首先分析比较3种除冰技术的特点,并结合实地案例,根据哈尔滨黎明大道公路隧道渗水结冰现象,对融冰装置的除冰效果进行实验分析,最终的分析结果和实验结论可为今后寒区隧道工程建设提供借鉴.
The initial corrosion behavior and mechanism of 7B04 aluminum alloy under acid immersion and salt spray environments(pH=3.5)are studied by Scanning Electron Microscope(SEM),optical microscope,Fourier Transform Infrared Spectroscopy(FT-IR),X-Ray Diffractio
Due to the strong background noise and the acquisition system noise,the useful characteristics are often difficult to be detected.To solve this problem,sparse coding captures a con-cise representation of the high-level features in the signal using the und
以水滑石(LDH)为载体,山梨酸钾(SBA)和SBA-十二烷基硫酸钠(SDS)为客体插层分子,通过焙烧复原法制备SBA-LDH和SBA-SDS-LDH两种插层复合材料.采用傅里叶变换红外光谱(FTIR)、X射线粉末衍射(XRD)、扫描电镜(SEM)和热重-差热分析(TG-DSC)对插层材料的结构和热稳定性进行表征和分析,并考察其在不同pH缓冲溶液体系中的缓释性能.结果表明,SBA和SBA-SDS能够插入到LDH板层间,客体阴离子以长轴垂直的方式排列.两种材料在pH为4.4和3.4的缓冲体系中均表现出良好的